Hyundai Electronics H-CMMD4048 - Инструкция по эксплуатации - Страница 22

22

23

Operation

General information

•  TV TYPE
This unit is suitable for all kinds of TV 

systems. You can select one of the PAL, NTSC 
or AUTO. 

Auto: the TV system is auto switched 

according to the broadcasting system.

NTSC: this system is used in USA, Taiwan, 

Japan etc.

PAL: this system is used in China, Europe, 

Hong Kong etc.

•  AUDIO, SUBTITLE, DISC MENU
Set the desired languages for all the 

settings. If a setting is supported by disc 
content, it will work. Otherwise the disc default 
value works. You also can press the ST/AUDIO 
button on the RC to select the audio language. 
Press the LOC/SUB-T button on the RC to 
select the subtitle language. 

•  PARENTAL
The control level is for parental to control 

playing content and protect your children from 
violence and erotic. The disc, the level of which 
is higher than the setting level can not be played.

Set the control level:
(1) with the least limits when playing.
(8) with the most limits when playing.
Original setting: OFF.

  The rating can be selected only under the 

Password unlocked status, and the limits can be 
worked only under the password locked status.

•  PASSWORD

OK

OLD PASSWORD

NEW PASSWORD
CONFIRM PXD

The password option is initialized as locked, 

and you cannot set the ratings limit or change 
the password. In order to make the Parental 
feature works, the password mode must be 
turned on. If you want to set the ratings limit, 
you will need to enter the default password, 
which is 8888, then press ENTER to confirm. 
To change the password, enter the Password 

change submenu. Use the cursor buttons to 
select the desired field. In the Old password 
field insert the old password or 8888 (if you 
forget the old one). If you change the password, 
the default password 8888 will be void.

In New password field insert the new 

password.

Insert it again in Confirm password field.
Press ENTER to save the new password.
•  DEFAULT
Reset to the initial factory setups.

Exit

Select the Exit page to exit the Setup menu.