Hyundai Electronics H-CMMD4048 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most 

functions not only by pressing buttons but also 
by touching the options you need.

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Press RES button on the unit with a 
pointed object (such as a ballpoint pen) to set 
the unit to initial state.

  When some errors occur on the display, 

you can also press RES button to resume to 
normal, and it will erase the clock setting and 
some memorized functions.

Turning the unit on/off

Press PWR/SOURCE button on the RC or 

PWR/SRC button on the panel to turn on the 
unit. Press and hold the button more than 2 
seconds to turn off the unit.

Open the monitor

Press OPEN button on the unit to open the 

monitor. Press the button again, the monitor 
returns to the previous state.

Angle setting

You can adjust the desired angle of the 

monitor. Press ANGLE   and ANGLE   
buttons to adjust monitor backward or forward 
by definite angle.

  Please do not adjust the monitor tilt 

manually, otherwise it can get damaged.

Volume control

Press VOL+/VOL- buttons on the RC or 

rotate VOL regulator on the unit to increase/
decrease the sound level.

Setting the sound characteristics

Repeatedly press SEL button on the RC or 

on the unit to select the desired parameter in the 
following order: VOL => BAL => FAD => BAS 

=> TRE => WOO. After selecting the desired 
parameter, you can adjust its current level by 
pressing VOL+/- buttons on the RC or rotating 
VOL knob on the unit.

Mute function

Press   button on the RC or MUTE button 

on the unit to turn off the sound. Press the 
button again or adjust volume to resume the 
sound output.

Equalizer setting

While listening to music, you can select 

the corresponding preset modes to adjust 
the sound quality perfectly by using AF/EQ 
button on the RC. Press and hold the button 
repeatedly to choose the following modes in 
turn: POP => CLASS => ROCK => JAZZ => 
Off (no equalizer).

Loudness

Press and hold TA/LOUD button on the RC 

or TA/LOU button on the panel to activate 
loudness function. LOUD will be displayed. 
This is to increase the low frequency, which 
can improve sensitivity for your ears. Keep 
pressing it again to quit this function.

Mode selection

•  In any mode, repeatedly press PWR/

SOURCE button on the RC or PWR/SRC 
button on the unit to select a mode: Radio 
=> GPS (not supported) => USB => SD => 
DVD => BT (not supported) => IPOD (not 
supported) => TV => AUX.

•  In any mode touch   item on the screen to 

display the source menu consisting of 2 pages. 
In the menu, touch the item of the mode you 
need to select the corresponding mode. To 
switch between the 2 pages, touch the screen 
on any non-functional area, then slide the page 
aside (rightwards/leftwards).

  The DVD, USB and SD modes are only 

available when a disc, USB or SD/MMC card is 
inserted into the unit.