Hyundai Electronics H-CMMD4048 - Инструкция по эксплуатации - Страница 14

14

Operation

1. Decrease value button.
2. Bass bar. Touch its segments or touch 

decrease/increase buttons to adjust bass.

3. Treble bar. Touch its segments or touch 

decrease/increase buttons to adjust treble.

4. Increase value button.
5. Left channel button. Touch to adjust left 

channel signal.

6. Front channel button. Touch to adjust 

front channel signal.

7. Right channel button. Touch to adjust right 

channel signal.

8, 10. Equalizer mode selection buttons.
11. Rear channel button. Touch to adjust 

rear channel signal.

Clock adjust

1

2 3 4

5

6

7

1. Decrease hour/minute/second button.
2. Hours. Touch to enable hour adjustment.
3. Minutes. Touch to enable minute 

adjustment.

4. Seconds. Touch to enable second 

adjustment.

5. Increase hour/minute/second button.
6, 7. 12/24-hour clock mode selection buttons.

Screen adjust

After you touch this item, a cross appears in 

the bottom left corner of the display. Press the 
cross at place 1, then it will move to another 
corner, press it again. Now it will move to the 
third position, press it, then the last position. 
After you pressed the green cross four times, OK 

button will appear in the center of the touchable 
display. Touch it to complete screen adjustment.

This procedure is useful when some 

malfunction occurs with the touch screen, and 
it needs adjustment.

System adjust

1

2

3

4

1. Parameter list.
2, 3. Option selection buttons.
4. List page scroll buttons. Touch to change 

parameter list pages.

In this menu you can adjust a number of 

general system operation parameters.

•  Key Beep: Select ON or OFF, the default 

setting is ON. It means when you press the 
buttons, they are sounded.

•  Moni Flex: select AUTO (the monitor is 

closed automatically when the unit is powered 
off) or MANUAL (the monitor remains in the 
adjusted position).

•  Rever Pola (Reverse Polarity): The signal is 

+12 V when you back a car, select BATTERY on 
the monitor; if the signal is 0 V, select GROUND.

•  Subwoofer: set the subwoofer on or off.
•  AMS Fullup: You can set the modes of 

AMS. When the setup is ON, the presettable 
stations are full, new one’s are not allowed. 
When you select OFF, it will search continually.

•  Local Area: You can select Europe, OIRT 

or FM ONLY, to search the stations quickly in 
your current area.

•  Local: In this menu you can search local 

stations. When selected ON, the strong signal 
local stations can be received; when selected