Hyundai Electronics H-CMD4034 - Инструкция по эксплуатации - Страница 15

15

Operation

Selecting stored station

In radio mode, press 

/

 buttons on the 

RC or on the panel to select the stored station 
upward/downward.

Mono/Stereo selector

In radio mode, you can press ST/AUDIO 

button on the RC to select mono or stereo 
mode. Stereo reception is on when MONO 
disappears on the display. It is switched to 
mono mode when MONO appears. When the 
received stereo signal is weak, switch to mono 
mode to improve the signal.

 The function is available only in FM bands.

Local/distant selector

In radio mode, press LOC/SUB-T button on 

the RC or LOC button on the panel to select 
strong or weak station reception. LOC appears 
on the display and only local stations are 
available. When you turn it off both distant and 
local stations can be received.

  The function is invalid in AM bands.

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

RDS touchable user interface

In Radio interface, touch the arrow in the left 

upper corner; following menu will be displayed:

2

1

3

4

5

1. Touch to go to Radio interface.

2. Touch it to set PTY function on or off.
3. Touch to set REG function on or off. 

When REG is on, AF switching or PI SEEK is 
implemented to the station which have all PI 
codes are same as current station.

4. Touch it to set TA function on/off.
5. Touch it to set AF function on/off.
All the other icons of this interface 

correspond to the main Radio interface.

AF (Alternative frequencies) function

Briefly press AF/EQ button on the RC or EQ/

AF button on the panel to enable AF function. 
When the radio signal strength is poor, 
enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received.

TA (Traffic alarm) function

Briefly press TA/LOUD button on the RC 

or LOUD/TA button on the panel to activate 
the traffic alarm function. When AF is on, the 
TA displays on TFT, or else, if there is no TP 
information, the mode will search TP station 
automatically.

PTY (Program type)

Briefly press PTY/ANGLE button on the RC 

to activate PTY function. When PTY is on, PTY 
menu appears on the monitor, you can touch 

 and   icons to select a program type. After 

selecting, touch the programm type icon to 
start searching the program.

TV tuner operation

TV touch screen menu

When you select TV mode, following 

touchable User Interface will be displayed: