Hyundai Electronics H-CMD4034 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most 

functions not only by pressing buttons but also 
by touching the options you need.

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Press Reset button on the inner panel with 
a pointed object (such as a ballpoint pen) to 
set the unit to initial state.

  When some errors occur on the display, 

you can also press Reset button to resume to 
normal, and it will erase the clock setting and 
some memorized functions.

Turning the unit on/off

Press PWR button on the RC or POWER/

MOD button on the panel to turn on the 
unit. Press and hold the button more than 2 
seconds to turn off the unit.

Display dimming/off

Press and hold MUT button on the panel or 

/  button on the RC to dim the TFT display. 

Press and hold this button again to switch off 
the TFT. Press and hold for the third time to 
enable the display.

Volume control

Press VOL+/VOL- buttons on the RC or 

rotate VOL regulator on the unit to increase/
decrease the sound volume level.

Setting the sound characteristics

Repeatedly press SEL button on the RC or 

on the unit to select the desired parameter in 
the following order: VOL (volume) => BAL L.R 
(balance left-right) => FAD R.F (fader rear/front) 
=> BAS (bass) => TRE (treble). After selecting 
the desired parameter, you can adjust its current 
level by pressing VOL+/- buttons on the RC or 
rotating VOL regulator on the unit.

Mute function

Press   button on the RC or MUT button on 

the unit to turn off the sound. Press the button 
again or adjust volume to resume the sound 
output.

Equalizer setting

While listening to music, you can select 

the corresponding preset modes to adjust the 
sound quality perfectly by using AF/EQ button 
on the panel or on the RC. Press and hold 
the button repeatedly to choose the following 
modes in turn: POP => CLASS => ROCK => 
Off (no equalizer).

Loudness

Press and hold TA/LOUD button on the RC 

or LOUD/TA button on the panel to activate 
loudness function. This is to increase the low 
frequency, which can improve sensitivity for your 
ears. Keep pressing it again to quit this function.

Mode selection

•  Repeatedly press MODE button on the RC 

or POWER/MOD button on the unit to select a 
mode: Radio => Media => TV => AV1 => AV2.

•  In any mode touch 

 item on the screen 

to display the Main menu. In the menu, touch 
the item of the mode you need to select the 
corresponding mode.

  The Media mode is only available 

when a disc, USB or SD/MMC card is inserted 
into the unit. IPOD and BT modes are not 
supported by this unit.

Clear

After inputting false data, press CLEAR 

button to clear it.

System setup

In any mode touch 

 icon to go to setup 

mode. When you select setup mode, the menu 
will be displayed, in which you can touch any 
item to perform operations. Setup menu includes