Hyundai Electronics H-CMD4034 - Инструкция по эксплуатации - Страница 14

14

Operation

correspondng band.

•  Key Beep: Select ON or OFF, the default 

setting is ON. It means when you press the 
buttons, they are sounded.

•  Rever Pola (Reverse Polarity): The signal 

is +12V when you back a car, select BATTERY 
on the monitor; if the signal is 0 V, select 
GROUND.

•  TA Volume: You can select LOW, 

NORMAL or HIGH TA volume.

Radio operation

User interface of Radio mode

When the unit is switched to Radio mode, 

the below touchable user interface will be 
displayed on the display.

1 2 3

4

5

6

7

8

9 10 11

12 13

14

15 16

17

1. Current band indicator.
2. Touch to go to RDS page.
3. Volume level.
4. Current frequency.
5. Current channel number.
6. Clock.
7. Touch to go to setup menu.
8. Return to Main menu.
9, 11. Touch repeatedly to change frequency 

step by step. Touch and hold for automatic 
search of the nearest station.

10. Touch to scan the current band 

channels. Touch and hold for automatic search 
and saving.

11. Touch to select bands.

13, 14. Touch to select previous/next saved 

station.

15. Touch to select mono/stereo reception.
16. Station list. Touch an item call the 

station. Touch and hold to save the current 
frequency in the preset position.

17. Touch to switch between local and 

distant station receprion.

Band selection

Press BAND/TITLE button on the RC or  /

BND button on the panel to switch to the bands 
in the following order: FM1 - FM2 - FM3 – FM4 
(OIRT) - AM1 - AM2.

Manual/automatic tuning

•  Manual tuning: Press 

/

 buttons on 

the RC repeatedly to change the frequency 
upward or downward step by step.

•  Automatic tuning: Press and hold 

/

buttons on the RC to start automatic seeking for 
an available radio station downward or upward. 
After being found the station will be played.

Manual storing of stations

Find the needed frequency, press and hold a 

number button (1~6) under which you want to 
store the station. The station will be stored. To 
call a stored station, press the corresponding 
number button.

Scanning/memorizing stations 

automatically

In radio mode, you can press AMS/MENU 

button on the RC or AMS button on the panel 
to scan for several seconds each station 
stored in number positions. You can press the 
corresponding number buttons, AMS/MENU 
button on the RC or AMS button on the panel 
when your desired station is on. And it starts 
playing that station.

Press and hold AMS/MENU button on 

the RC or AMS button on the panel; it will 
activate automatic storing function. The tuner 
automatically finds a station and stores it in 
number positions.