Hyundai Electronics H-CMD4024 - Инструкция по эксплуатации - Страница 14

14

Operation

which has different PI and no RDS signal with 
high field strength.

•  EON TA DX/LOCAL: EON (Enhanced 

Other Networks) - This unit is equipped with 
the latest technology of EON control, so that 
when you are listening to Radio or CD, if there 
is any travel announcement from a nearby 
local station, the radio will already know the 
frequency of that radio station. Then it will 
receive the station, turn up the volume, or 
interrupt the playback for the duration of the 
announcement. At the end of the announcement 
the radio will return to its previous state ready 
for the next announcement.

•  REG ON/OFF: When REG is available (On), 

the receiver accepts regional variants of the 
tuned station display. When REG is unavailable 
(Off), the receiver ignores regional variants.

•  TA VOL: You can set the default volume of 

TA announcement. Support 50 levels. Default 
level is 15.

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 8 

Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid 
using memory cards of unknown brands. 
Capacity: up to 8 Gb.

Insert/Eject disc

•  Open the front panel and insert a disc into 

the disc slot with label side up. The disc will be 
automatically loaded into the unit. The first file 
in the root folder will be played. Close the front 
panel.

•  Open the front panel and press EJECT 

button to eject the disc from the slot. If the disc 
is not removed from the slot within several 
seconds, it will be automatically loaded into 
the slot again. When the disc is ejected and 
removed, the unit will automatically switch to 

another mode.

Inserting an SD/MMC card/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the 
USB slot cover on the front panel and insert 
a USB into the USB slot. Then the playing 
mode will be changed into Card or USB mode 
automatically. The first card/USB device track 
playback will start.

  When SD/MMC card and USB device are 

both inserted, the playing mode will be changed 
into the mode of the device inserted later.

Play/pause

The unit will automatically play from the first 

sound track recorded on a disc/SD/MMC/USB 
device. To ensure good system performance, 
wait until the unit finishes reading the disc/
device information before proceeding. Press 

 button on the RC or MEM/

 button on 

the panel to pause playback, press it again to 
resume playback.

MP3/DivX/JPEG file playback

When you insert a storage containing MP3/

DivX/JPEG file, the screen will show following 
interface:

1

2

3

4

5

6

7

8

1. Storage folder list
2. Scroll bar
3. Current playback info
4. Current folder content (current file is