Hyundai Electronics H-CMD4024 - Инструкция по эксплуатации - Страница 11

11

Operation

VOLUME knob on the panel to select the audio 
setting item. Press ENTER button or RIGHT 
cursor button on the RC or OK button on the 
panel to enter the selected item.

Press LEFT/RIGHT buttons on the RC or 

rotate VOLUME knob on the panel to adjust the 
audio setting. Press SEL button on the RC again 
to save the setting and return to current mode.

  If turn off the power, all the settings 

of each mode will be saved. If turn off the 
ACC power, all the settings will be clear and 
become factory default setting. If you don’t 
adjust setting within several seconds after 
selecting the desired setting item, the unit will 
automatically return to the current mode.

System setup

Press MENU button on the panel or RC to 

enter Setting Menu. Press UP/DOWN cursor 
buttons on the RC or rotate VOLUME knob on 
the panel to select a menu page. Press ENTER 
button or RIGHT cursor button on the RC or 
press OK button on the panel to enter the page. 
Press UP/DOWN cursor buttons on the RC or 
rotate VOLUME knob on the panel to select an 
item, then press ENTER button on the RC or OK 
button on the panel to adjust the setting.

Press MENU button to return to the last 

setting list.

AUDIO MENU
•  Bass: Support 10 levels. Default level is 0.
•  Treble: Support 10 levels. Default level is 0.
•  Balance: Support 10 levels for each left 

and right channel. Default is left equal to right.

•  Fader: Support 10 levels for each front and 

rear channel. Default is front equal to rear.

•  EQ DSP: FLAT => CLASSICS => POP 

=> ROCK => DSP OFF. You can also select a 
DSP mode by pressing repeatedly DSP button 
on the front panel.

PICTURE MENU (available in DVD/USB/

Card modes only)

•  Red: Adjust level of red color. Support 50 

levels. Default level is 25.

•  Green: Adjust level of green color. Support 

50 levels. Default level is 25.

•  Blue: Adjust level of blue color. Support 50 

General operations

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Press RESET button (hole) with a pointed 
object (such as a ballpoint pen) to set the unit 
to initial state.

  When some errors occur, you can also 

press RESET button to resume to normal, 
and it will erase the clock setting and some 
memorized functions.

Turning the unit on/off

Press any button on the panel or the RC 

(except OPEN button) to turn on the unit. Press 
and hold POWER/MUTE button on the panel 
or press POWER button on the RC to turn off 
the unit.

Mode selection

Repeatedly press MODE button on the RC 

or on the panel to select a mode: Tuner => 
DVD => USB => Card => AV IN.

  The DVD, Card and USB modes are 

only available when corresponding storages 
are inserted into the unit.

Mute function

Press MUTE button on the RC or POWER/

MUTE button on the panel to turn off the 
sound. “MUTE” appears on the display. Press 
the button again or adjust volume to resume 
the sound output.

Volume control

Press VOL+/VOL- buttons on the RC or 

rotate VOLUME knob on the panel to decrease 
or increase sound volume level.

Setting the sound characteristics

Press SEL button on the RC to select the 

audio setting menu: BASS =>TREBLE => 
BALANCE => FADER => EQ. Press UP/
DOWN cursor buttons on the RC or rotate