Hyundai Electronics H-CMD4024 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

levels. Default level is 25.

•  Brightness: Adjust level of screen 

brightness. Support 50 levels. Default level is 25.

•  Contrast: Adjust level of screen contrast. 

Support 50 levels. Default level is 25.

•  Sharpness: Adjust level of screen 

sharpness. Support 15 levels. Default level is 10.

•  Screen: Adjust screen aspect: 16:9 => 4:3 

=> FULL.

•  Color reset: Resume color default status. 

(Select YES or NO with cursor buttons, press 
ENTER button on the RC or OK button on the 
panel to confirm).

EXPERT MENU
•  DX: Set search radio station by DX or 

LOCAL mode. DX => LOCAL.

•  Stereo: Set radio audio at STEREO or 

MONO mode, STEREO => MONO.

•  Beep: Set press button sound. 2ND => 

ALL => OFF.

•  Loud: Set loudness on or off. OFF => ON.
•  Subwoofer: Set subwoofer ON or OFF.
•  Backlight: Set OSD backlight: HIGH => 

LOW => MID.

•  OSD color: Set OSD color: DARK BLUE 

=> VIOLET => LIGHT BLUE.

CLOCK MENU
•  Clock: Set CLOCK display time or not. 

OFF/ON.

•  Clock Hour: set clock 12H/24H.
•  Clock adjust: Set CLOCK ADJUST time.

Subwoofer

Connect a subwoofer to this unit using the 

Subwoofer output of this unit. For subwoofer 
operation an external amplifier is required.

AV in jack

AV jack is intended to receive audio and video 

signals by connecting to external device.

Radio operations

Band selection

Press BND/RDM button on the RC or BAND 

button on the panel to switch to the bands in 
the following order: FM1 - FM2 - FM3 (OIRT) – 
MW (AM).

Manual/automatic tuning

•  Manual tuning: Press and hold SEEK- 

/

SEEK+ 

 buttons on the RC to enter manual 

tuning mode. MANUAL will be displayed. 
Press these buttons repeatedly to change the 
frequency upward or downward step by step.

•  Automatic tuning: Press repeatedly SEEK- 

/SEEK+ 

 buttons on the RC or press 

and hold these buttons on the panel to start 
automatic seeking for an available radio station 
downward or upward. After being found the 
station will be played. To stop seeking, press 
one of these buttons again.

Programming stations

•  There are 6 numbered preset buttons on 

the RC, with which you can store and recall 
stations for each band (18 FM, 6 AM). Select 
a station, then press and hold a preset button. 
The station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button.

•  You also can save stations in the memory 

with MEM/

 button on the front panel. When 

the needed frequency is found, press MEM/

, 

then rotate VOLUME knob to select a memory 
position (PRESET 1 - 6) and press OK button 
to confirm saving.

Auto memory store/Preset scan

Auto store: Select a band, press and hold 

AS/PS button on the panel or P.SCN/RPT 
button on the RC to enter auto store mode. 
The radio will automatically store 6 stations to 
the 6 preset memories of the current band. To 
stop auto store, press the button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan: Select a band, press AS/PS 

button on the panel or P.SCN/RPT button 
on the RC to scan all preset stations in the