Hyundai Electronics H-CMD4024 - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

memories of the current band. To stop preset 
scan, press the button again.

Stereo/Mono reception

In FM mode, press STEREO/MONO button 

on the RC to select stereo or mono signal 
reception mode. 

On-screen display

Press OSD button on the RC to show 

enabled PTY function icon.

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

AF (Alternative frequencies) function

Press and hold AF/TA button on the RC 

or MENU button on the panel to enable AF 
function. When the radio signal strength is poor, 
enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is 
not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Press AF/TA button on the RC or press and 

hold OK button on the panel to activate the 
traffic alarm function.

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, it 
will return to the previous mode. Press AF/TA 
button on the RC once to ignore the received TA 
information, do it twice to turn off the function.

PTY (Program type) function

Press PTY/PROG button on the RC to open 

PTY program type list, and repeat pressing 
PTY/PROG button to select a PTY type. After 
selecting the program type you want, press 
number buttons 1 - 6 on the RC to start search. 
Press it again to stop the PTY search. If PTY 
code is different or not available, “PTY NONE” 
blinks on the display.

Other functions

Press MENU button on the panel or RC to 

enter Setting Menu. Press UP/DOWN cursor 
buttons on the RC or rotate VOLUME knob on 
the panel to select RDS SETUP page. Press 
ENTER button or RIGHT cursor button on the 
RC or press OK button on the panel to enter the 
page. Press UP/DOWN cursor buttons on the RC 
or rotate VOLUME knob on the panel to select 
an item, and then press SEL button on the RC or 
OK button on the panel to adjust the setting.

Press ENTER button on the RC or OK 

button on the panel to confirm, press MENU 
button to return to last settings list.

RDS SETUP
•  TA ALARM/SEEK: In TA SEEK mode, the 

unit will seek for traffic announcement program; 
in TA ALARM mode, the alarm is set off.

•  PI SOUND/MUTE: Choose either PI sound 

or PI mute. PI sound refers to the reception 
noise when the AF function tries to scan 
alternative frequency.

•  RETUNE S/L: RETUNE refers to the time 

period the unit allows for radio scan when 
reception is interrupted. SHORT represents 
a time period of 30 seconds and LONG 
represents a time period of 90 seconds.

•  MASK DPI/ALL: During MASK DPI mode, 

the unit will mask only the AF which has 
different PI, this is the default mode; during 
MASK ALL mode, the unit will mask the AF