Clarion CX609E - Инструкция по эксплуатации - Страница 26

U

S

B/MTP Operations

English

26

CX609E

• Do not turn on vehicle ignition when the 

MTP device is connected, since it may 
result in loss or damage to data on the 
MTP device. Connect the MTP device to 
the USB cable after vehicle ignition is 
turned on.

Connecting a U

S

B memory/MTP 

device

1. Connect the USB memory/MTP device to the 

USB cable.

Playback will begin from the first file 
recorded on the device. 

∗

If the device is not recognized, press the 
[

SRC

] button to switch the source to the 

device. 

∗

Always insert the device fully into the 
connector. Incomplete connections may 
cause the device not to be recognized.

∗

Depending on the number of tracks recorded, 
some amount of time may be required until all 
tracks are read into the unit.

∗

The order in which tracks are recorded may 
differ depending on the device connected (the 
actual playback order may not be the same as 
that indicated on your computer’s display). 

To listen to tracks on a connected 
U

S

B memory/MTP device

1. Press the [

SRC

] button to switch the source. 

When USB memory/MTP device is selected, 
playback (except DRM files) will begin from 
the location at which playback was 
previously stopped. 

∗

When a USB memory/MTP device is 
connected the USB/MTP mode will be 
displayed.

∗

When a USB memory/MTP device is 
disconnected and then reconnected, playback 
will begin from the beginning of the USB 
memory/MTP device.

∗

When “

MTP

” mode is selected, AAC files on 

the MTP device cannot be played. 

To stop play

1. Press the [

SRC

] button and switch the 

function to a source other than the USB 
memory/MTP. 

CAUTION

Do not remove the USB memory/MTP device 
when the USB/MTP mode is selected, since it 
may result in loss or damage to data on the 
USB memory/MTP device. 

Always backup and save important data on 
your computer.

2. Remove the USB memory/MTP device from 

the USB cable.