Chief (K1C120BXRH) - Инструкция по эксплуатации - Страница 2

K1C Series

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

DEFINITIONS

MOUNTING SYSTEM:

A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY:

AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT:

A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

 IMPORTANT SAFETY INSTRUCTIONS!

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.

WARNING:

Failure to provide adequate structural strength

for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.

WARNING:

Use this mounting system only for its intended

use as described in these instructions. Do not use
attachments not recommended by the manufacturer.

WARNING:

Do not use this product outdoors.

WARNING:

Never operate this mounting system if it is

damaged. Return the mounting system to a service center for
examination and repair.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the K1C Series Monitor Arm
and the desk up to (and including) the display does not the
weight limits listed in the table below. Use with products
heavier than the maximum weight indicated may result in
collapse of the mount and its accessories causing possible
injury.

--SAVE THESE INSTRUCTIONS!--

MODEL

Max Weight
Allowed for EACH

Max Weight
Capacity of

K1C110

25 lbs

(11.34 kg)

25 lbs

(11.34 kg)

K1C120

25 lbs

(11.34 kg)

25 lbs

(11.34 kg)

K1C120XRH

25 lbs

(11.34 kg)

25 lbs

(11.34 kg)

K1C120BI2

2 lbs

(0.9 kg)

2 lbs

(0.9 kg)

K1C210

25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1C220

25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1C120SXF1

25 lbs

(11.34 kg)

25 lbs

(11.34 kg)

K1C210SXF1

25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1C220SXF1

25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1C220XRH

25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1C22H

9 lbs

(4.08 kg)

18 lbs

(8.16 kg)

K1C22HSXF1

9 lbs

(4.08 kg)

18 lbs

(8.16 kg)

K1C22HXRH

9 lbs

(4.08 kg)

18 lbs

(8.16 kg)

K1C330

20 lbs

(9.07 kg)

60 lbs

(27.2 kg)

K1C420

20 lbs

(9.07 kg)

80 lbs

(36.3 kg)