Chief (K1C120BXRH) - Инструкция по эксплуатации - Страница 16

K1C Series

Installation Instructions

16

2.

Carefully place display face down on protective surface.

3.

Connect faceplate to display

For flush mounting hole installation:

•

Using Phillips screwdriver, carefully install four
M4x10mm screws (B) through corresponding
holes on faceplate and into the mounting holes on
the display. (See Figure 14)

Figure 14

For recessed mounting hole installation:

•

Place four spacers (D) on top of mounting holes
on back of display. (See Figure 15)

•

Using Phillips screwdriver, carefully install four
M4x20mm screws (C) through corresponding
holes on faceplate, spacers (D) and into the
mounting holes on the display. (See Figure 15)

Figure 15

4.

Position display with faceplate attached above mount. (See
Figure 16)

5.

Slide faceplate onto mounting head until quick release tab
clicks into place. (See Figure 16)

Figure 16

Handle Installation (K1C22H, K1C22HSXF1 and
K1C22HXRH models only)

1.

Loosen four screws securing handle brackets to K1C22H
array. (See Figure 17)

2.

Install uprights of handle (J) into handle brackets located on
the back of K1C22 array. (See Figure 17)

Figure 17

(for flush mounting holes)

(B) x 4

quick release

faceplate

3

(for recessed mounting holes)

(C) x 4

(D) x 4

quick release

faceplate

3

5

2

2

(J2)

1

x 4