Tesla TT68X71 - Инструкция по эксплуатации - Страница 42

42

ENG

Cooling mode

Heating mode

Dry mode

Fan mode (not FAN button)

Auto mode

To activate the cooling function (COOL) , press the 

MODE

 button until 

the symbol COOL appears on the display.
The cooling function is activated by setting the button   or   at a 
temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust the temperature 
(1), the speed (2) and the direction of the air flow (3) by pressing the 
button indicated.

To activate the heating function (HEAT) , press the 

MODE

 button until the symbol HEAT appears on the display.

With the button   or   set a temperature higher than that of the room.
To optimize the function of the Air conditioner adjust the temperature (1), the speed (2) and the direction of the air 
flow (3) by pressing the button indicated.

To set the DRY mode, Press  

MODE

  until DRY appears in the display.  An automatic function of alternating cooling 

cycles and  air fan is activated.

To set the FAN mode, Press 

MODE

 until FAN appears on the display.

To activate the AUTO mode of operation, press the 

MODE

 button on the remote controller until the symbol 

AUTO appears on the display. In AUTO mode , the air conditioner will run automatically according to the room 
temperature.

In HEATING operation, the appliance can automatically activate a defrost cycle, which is 
essential to clean the frost on the condenser so as to recover its heat exchange function.
This procedure usually lasts for 2-10 minutes during defrosting,indoor unit fan stop 
operation. After defrosting ,it resumes to HEATING mode automatically.

WARNING!

The cooling function allows the air condit- ioner to cool 
the room and at the same time reduces Air humidity.

The heating function allows the air conditi- oner to heat 
the room.

This function reduces the humid- ity of the air to make the 
room more comfortable.

The air conditioner works in only ventilation.

Automatic mode.