Rommelsbacher EKS 1510 - Инструкция по эксплуатации - Страница 40

40

Step 6:

Place a vessel below the outlet of 
the portafilter.

Step 5:

Position the portafilter without filter 
insert at the marking of the brew 
head and lock it by turning it to the 
right as far as it will go.

Step 7:

Choose the function 
“espresso/hot water”.

Step 8:

Switch the appliance on.
The appliance heats up and the 
temperature pilot lamp glows red 
permanently. 
When the lamp exinguishes, the 
appliance is ready for use. The 
operation pilot lamp glows blue 
permanently.

Step 9:

Start the descaling process. Turn the 
rotary knob to the left. Dispense 1/3 
of the decalcifier.

Step 11:

Switch the appliance off.

Wait for 8 – 10 minutes

 so that 

the decalcifier can soak.

Step 10:

Stop the descaling process.
Turn the rotary knob to the top.
NOTE: The appliance carries excess 
water back into the water tank via a 
recirculation system!

Step 12:

Repeat step 7 – 11 

twice.

Check the collecting vessel regularly, 
empty it if necessary.

Step 13:

Place a collecting vessel below the 
outlet of the hot water/steam nozzle.

Step 14:

Choose the function 
“espresso/hot water”.

Step 15:

Switch the appliance on.
The appliance heats up and the 
temperature pilot lamp glows red 
permanently. 
When the lamp exinguishes, the 
appliance is ready for use. The 
operation pilot lamp glows blue 
permanently.

Step 16:

Start the descaling process. Turn the 
rotary knob to the right. Dispense 
decalcifier for 15 seconds.