Rommelsbacher EKS 1510 - Инструкция по эксплуатации - Страница 33

33

Step 8:

 (bleeding)

Start hot water supply.
Turn the rotary knob to the right. 
Dispense hot water until it comes 
without air. Use the water for 
warming the cups.

Step 9:

 (bleeding)

Stop hot water supply. 
Turn the rotary knob to the top.
NOTE: The appliance carries excess 
water back into the water tank via a 
recirculation system!

Making espresso/coffee

•  For a perfect result, we recommend ...
  …  initial use without filter insert and powder for preheating the system (see steps 4a - 4d)
  …   preheating the cups 
  …   using fresh tap water 
  …   using freshly ground powder
  …  exchange water in the tank regularly.

Warning: 

Casing, brew head, 

portafilter, filter inserts and hot 
water/steam nozzle are getting hot 
during use!

Step 2:

Choose the function 
“espresso/hot water”.

Step 3:

Switch the appliance on.
The appliance heats up and the 
temperature pilot lamp glows red 
permanently. 
When the lamp exinguishes, the 
appliance is ready for use. The 
operation pilot lamp glows blue 
permanently.

Step 4a:

 (preheating the system)

Position the portafilter without filter 
insert at the marking of the brew 
head and lock it by turning it to the 
right as far as it will go.

Step 4b:

 (preheating the system)

Place a vessel below the outlet of 
the portafilter.

Step 4c:

 (preheating the system)

Start water supply. Turn the rotary 
knob to the left. Dispense hot water 
for 10 seconds.

Step 4d:

 (preheating the system)

Stop water supply. Turn the rotary 
knob to the top.

Step 1:

Prepare the appliance.

Preheating the system:

•  Check the water tank 

regularly, refill water if 
necessary. 

•  Check the drip pan 

regularly, empty it if 
necessary.