Rommelsbacher EKS 1510 - Инструкция по эксплуатации - Страница 37

37

Step 16:

If the appliance is not needed any 
more, switch it off and pull the 
mains plug.

Step 17:

Clean the appliance and the 
accessories.

Making hot water

•  With this appliance, hot water for tea etc. can be made. 
•  Water out of the hot water/steam nozzle has a temperature of ca. 85 °C.

• 

Attention:

 Make sure that the holes in the nozzle are always clean and not clogged.

• 

Attention

: For moving the nozzle, only touch it at the upper plastic part.

Step 2:

Position the portafilter without filter 
insert at the marking of the brew 
head and lock it by turning it to the 
right as far as it will go.

Step 3:

Place a vessel below the outlet of 
hot water/steam nozzle.

Warning: 

Casing, brew head, 

portafilter, filter inserts and hot 
water/steam nozzle are getting hot 
during use!

Step 1:

Prepare the appliance.

Please refer to

“Cleaning and maintenance” 

for further information.

•  Check the water tank 

regularly, refill water if 
necessary. 

•  Check the drip pan 

regularly, empty it if 
necessary.

Step 4:

Choose the function 
“espresso/hot water”.

Step 5:

Switch the appliance on.
The appliance heats up and the 
temperature pilot lamp glows red 
permanently. 
When the lamp exinguishes, the 
appliance is ready for use. The 
operation pilot lamp glows blue 
permanently.

Step 6:

Start hot water supply. 
Turn the rotary knob to the right. 
Dispense the desired quantity of 
hot water.

Step 7:

Stop hot water supply. 
Turn the rotary knob to the top. The 
appliance is ready for use. 
NOTE: The appliance carries excess 
water back into the water tank via a 
recirculation system!