Кофеварка Saeco SM8889/00 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19
English
Problem
Cause
Solution
I cannot remove the brew
group.
The brew group is not in the
correct position.
Reset the machine in the following way:
close the service door. Switch the machine
off and back on again and wait until the
machine is ready for use. Try to remove
the brew group again. See chapter
'Removing and inserting the brew group'
for step-by-step instructions.
I cannot insert the brew
group.
The brew group is not in the
correct position.
Reset the machine in the following way:
close the service door. Leave the brew
group out. Switch off the machine and
unplug it. Wait for 30 seconds and then
plug the machine back in, switch it on and
wait until the machine is ready for use.
Then put the brew group in the correct
position and reinsert it into the machine.
See chapter 'Removing and inserting the
brew group' for step- by-step instructions.
The coffee is watery.
The brew group is dirty or needs
to be lubricated.
Remove the brew group, rinse it under the
tap and leave it to dry. Then lubricate the
moving parts (see 'Lubricating the brew
group').
The machine is performing its self-
adjustment procedure. This
procedure is started automatically
when you use the machine for the
first time, when you change to
another type of coffee beans or
after a long period of non-use.
Brew 5 cups of coffee initially to allow the
machine to complete its self-adjustment
procedure.
The grinder is set to a too coarse
setting.
Set the grinder to a finer (lower) setting.
Brew 2 to 3 drinks to be able to taste the
full difference.
The coffee is not hot
enough.
The temperature is set too low.
Set the temperature to the maximum
setting (Fig. 42).
A cold cup reduces the
temperature of the drink.
Preheat the cups by rinsing them with hot
water.
Adding milk reduces the
temperature of the drink.
Regardless of whether you add hot or cold
milk, adding milk always reduces the
temperature of the coffee. Preheat the
cups by rinsing them with hot water.
Coffee does not come out
or coffee comes out
slowly.
The AquaClean water filter was
not prepared properly for
installation.
Remove the AquaClean filter and dispense
some hot water. If this works, the
AquaClean filter was not installed
properly. Reinstall and activate the
AquaClean filter and follow all steps in
chapter 'AquaClean water filter'.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
