BRAYER BR1108 - Инструкция по эксплуатации - Страница 11

11

EN

• 

When the coffee maker is ready for operation, the light 

indicator (7, 8, 9) will glow constantly.

• 

To make one cup of espresso, use the small filter (21) 

and press the «Espresso»-button (7) once; the light 

indicator « » will light up.

• 

To make two cups of espresso, use the larger filter (22) 

and press the «Espresso»-button (7) twice; the light 

indicator « » will light up. In this case set one big or 

two small cups on the grid (2 or 3).

Notes:

 -

if you need to switch the coffee maker off during the 

espresso making, press the «Espresso»-button (7) 

again;

 -

successive making of coffee should be performed 

with intervals 2-3 min.

•  Remove the cup with ready drink from the grid (2 or 3).

• 

After you finish using the coffee maker, switch the 

coffee maker off by setting the switch (11) «0/I» to the 

position «0».

• 

Wait until the coffee maker cools down, remove the 

filter holder (20) and wash the installed filter (21 or 22).

ESPRESSO PORTION SETTING

•  When making espresso, press and hold the button 

(7) « » for 3 seconds, the one cup indicator « » will 

be flashing. When the desired amount of espresso is 

dispensed, release the button (7). The maximal amount 

of one cup of coffee is about 90 ml. 

•  Next time when you make espresso, the preset amount 

of ready coffee will be poured into the cup. 

•  When making espresso, press twice and hold the button 

(7) « » for 3 seconds, the two cups indicator « » will 

be flashing. When the desired amount of espresso is 

dispensed, release the button (7). Maximal amount of 

double portion of coffee is about 130 ml.

•  Next time when you make espresso, the preset amount 

of ready coffee will be poured into the cup

Notes: 

 - minimal and maximal amount of espresso 

are specified in the table «CHOOSING THE 

APPROPRIATE CUP»;

 -

if you need to make a lesser amount of coffee then it 

was set, press the button (7) again when the cup is 

filled with necessary amount of ready coffee.

Return to the factory settings

• 

To return to the factory settings switch the coffee maker 

off by setting the switch (11) «0/I» to the position «0».

•  Press and hold the button (7) «Espresso», switch the 

coffee maker on by setting the power switch (11) «0/I» 

to the position «I», the buttons « » and « » indicators 

will flash 5 times.

• 

The coffee maker is ready for operation with the factory 

settings.