Krups Evidence Plus EA894810 - Инструкция по эксплуатации - Страница 40

You can also start the descaling program when you want:

- Fill the water tank up to the 

CALC

mark.

- Pour the dose of descaler into the water tank.
- Press the Settings button

.  

- Select Maintenance.
- Then Descaling.

Important: 

if you unplug your machine during cleaning or in the event of electrical failure, the descaling program
will resume the current step at the time of the incident. It will not be possible to postpone this operation.
Complete the full descaling cycle in order to remove all traces of the descaling product which is harmful
to health.

Si l’un des problèmes énoncés dans le tableau persiste, appelez le service consommateurs KRUPS.

!

PRObLEmS AND CORRECTIVE ACTIONS

PRObLEm

CORRECTIVE ACTIONS

The machine displays a fault, the software
is frozen.
OR
Your machine has a malfunction.

Turn off and unplug the machine, remove the filter cartridge, wait
a minute and restart the machine.
Press  and  hold  the  on/off  button  for  at  least  3  seconds  for
starting.

The device does not turn on after pressing
the On/Off button (for at least 3 seconds). 

Check  the  fuses  and  the  power  socket  of  your  electrical
installation.
Check  that  the  two  power  plugs  are  correctly  inserted  into  the
socket.

The appliance must be disconnected and
reconnected.

Unplug  the  appliance  for  20  seconds,  remove  the  Claris  Aqua
Filter System cartridge if necessary, then put it back into service.

A power failure has occurred during a cycle. The device resets automatically when when it turns back on.

The grinder makes an abnormal noise.

Foreign bodies are surely present in the grinder.

There is water under the device.

Before removing the water tank, wait 15 seconds after the flow of
coffee so that the machine finishes its cycle correctly.
Verify that the drip tray is well positioned on the machine. It must
always be in place even when the machine is not in use.
Verify that the drip tray is not full.

When switching off, hot water flows through
the coffee outputs and the One Touch
Cappuccino block.

Depending on the type of preparation the machine can perform
automatic rinsing during its powering off.
The cycle lasts only a few seconds and stops automatically.

The adjustment button for the grinding
fineness is difficult to turn.

Turn  the  adjustment  button  of  the  grinding  fineness  only  when
the grinder is operating.

The device has not issued any coffee.

An incident has been detected during its making.
The device is reset automatically and is ready for a new cycle.

You have used ground coffee instead of
coffee beans.

Use your vacuum cleaner to collect the ground coffee contained
in the bean container.

36

OPERA

TION

USE

KR_EVIDENCE RELIFT_7211003315_EN.qxp_Mise en page 1  16/07/2018  12:04  Page36