Krups Evidence Plus EA894810 - Инструкция по эксплуатации - Страница 34

Please note:

when starting each drink, the machine will take into account the settings for the last drink that was made.

The stages of preparation of the drink:

- Bean grinding
- Compaction of the grinding
- Percolation
- Preheating phase to froth the milk

Possible settings

You can: 

- Prepare one or two cups at the same time.
- Increase the strength of the coffee by pressing DARK 

.

- Add an espresso coffee in your DRINK by pressing EXTRA SHOT 

.

- Adjust the coffee volume 
- Adjust the length of time for frothing the milk.

making a Cappuccino 

A cappuccino is made up of 1/3 creamy froth, 1/3 coffee and 1/3 hot milk.

- Connect the milk tube 

Fig. 13

to the right side of the “One Touch Cappuccino” block.

- Immerse the other end of the tube (slanted side) in a container filled with milk or directly in your milk bottle or

milk pot (according to model). 

Fig. 14

- Place the cup or cups under the coffee nozzles. 

Fig. 15

- Press the cappuccino button. 

Fig. 16 

- The preparation begins with frothing the milk

You can adjust your frothing time using the navigation buttons 

which allow the quantity of milk and

froth to be varied.

- This process continues with the flow of coffee

You can adjust your volume of coffee using the navigation buttons 

if you wish.

- Your drink is ready. 

Fig. 17

. 

making a Latte macchiato 

A latte macchiato made up of a higher dose of milk than a cappuccino. 1/4 of creamy froth, 1/4 of coffee and 2/4 of
hot milk.
We recommend that you use a cup of approximately 250 ml.
To make a latte macchiato you can follow the same steps as for cappuccino by pressing the latte macchiato button.

Fig. 18

. 

making a Caffe latte 

A caffe latte is made up of an espresso mixed with a large dose of milk and topped with froth tasting slightly of coffee.
We recommend that you use a cup of approximately 250ml.
To make a caffe latte you can follow the same steps as for cappuccino by pressing the caffe latte button.
For this recipe the coffee is poured in first and then the machine delivers the frothy milk.

maintenance after making milky drinks
milk rinsing

The screen shows “Rinse milk? “ at the end of each preparation.

- Press 

to perform rinsing.

- During milk rinsing, you are required to systematically dismantle and clean the milk tube and connector with

hot water.

- For  the  best  results,  it  is  advised  to  clean  the  "One  Touch  Cappuccino"  removable  block  regularly  (see

generalmaintenance chapter).

Important:

it is recommended that complete cleaning is carried out at the end of each use of the milk function to
ensure good hygiene of the frothing accessories and good milk frothing.

PREPARING mILKy DRINKS VIA DIRECT ACCESS

!

30

KR_EVIDENCE RELIFT_7211003315_EN.qxp_Mise en page 1  16/07/2018  12:04  Page30