Siemens TE501205RW - Инструкция по эксплуатации - Страница 9

5

en

LED display

The various LEDs light up and flash to 

 indicate the following:

D

 lights up The water tank is empty and 

needs to be refilled.

D

 flashes The water filter is exhausted 

and needs to be replaced�

Important: 

When you first take 

the appliance into  operation 

this flashing light does not 

signify “Change filter” (see 

“Setting up the appliance”)

E

 lights up The bean container is empty 

and needs to be refilled.

F

 lights up The steam valve needs to be 

opened or closed�

F

 flashes

Depending on the setting, 

steam or hot water is coming 

out of the milk frother�

G

 lights up When 

G

 is selected using 

the “coffee strength” rotary 

knob, the symbol lights up 

while ground coffee is being 

dispensed�

H

 lights up The drip tray is missing or has 

not been inserted correctly� 

Insert the drip dray�

H

 flashes

The trays are full� Empty the 

trays and reinsert them�

I

 lights up The brewing unit door is open� 

Close the door�

I

 flashes

Remove and clean the  brewing 

unit�

Controls

Power on/off switch O / I 

The power on/off switch 

O / I

 (9) is used to 

switch the appliance on or to switch it off 

completely (power supply off)� 

Important: 

To switch off, use the service 

button (12)�

Service button 

A

When the service button (12) is pressed 

briefly, the appliance rinses and switches 

off. If the service button (12) flashes, the 

service programme needs to be run� Press 

and hold the service button (12) to start 

the service programme� The service button 

(12) flashes while the service programme is 

running and turns off when the programme 

has ended�

Steam button 

B

Press the steam button (11) to generate 

steam for frothing milk�

Start button 

C

Press the start button (10) to start preparing 

a drink� Press again during drink preparation 

to stop the dispensing process early�