Siemens TE501205RW - Инструкция по эксплуатации - Страница 13

9

en

1�  Turn the rotary  

knob (13) to position 

2�  Press and hold buttons 

B

 (11) and 

A

 (12) simultaneously for at least 

5  seconds� The set water hardness is 

indicated by the number of LEDs that 

now light up�

3�  Now press the start button (10) repeat-

edly until the required water hardness 

is indicated, e� g�, for water hardness 3, 

LEDs 

D

, 

E

 and 

F

 will light up�

4�  Press and hold the start button (10) 

for at least 5 seconds� The set number 

of LEDs will light up to indicate that 

the  selected water hardness has been 

saved successfully�

Important:

 If a water filter is used 

(see 

“Accessories”), proceed as follows, see 

“Water filter”.

Note:

 If no button is pressed within 

90  seconds, the appliance switches to 

stand-by mode without saving the new 

 settings� In this case, the previously saved 

water hardness setting is retained�

Automatic switch-off

Here you can set the period of time after 

which the appliance should switch off 

automatically following the last drink 

preparation� A time between 15 minutes and 

4 hours can be set� To save power you can 

specify a shorter period�

1�  Turn the rotary  

knob (13) to position 

2�  Press and hold buttons 

B

 (11) and 

A

 (12) simultaneously for at least 

5 seconds� The time after which the 

appliance should switch off is indicated 

by the number of LEDs that now light up�

3�  Now press the start button (10) repeat-

edly until the required number of LEDs 

light up to indicate the switch-off time: 

D

 = 15 minutes 

D

 and 

E

 = 30 minutes 

D

, 

E

 and 

F

 = 45 minutes 

D

, 

E

, 

F

 and 

G

 = 1 hour 

D

, 

E

, 

F

, 

G

 and 

H

 = 2 hours 

D

, 

E

, 

F

, 

G

, 

H

 and 

I

 = 4 hours

4�  Press and hold the start button (10) for 

at least 5 seconds� The set number of 

LEDs will light up to indicate that the 

selected switch-off time has been saved 

successfully�

Note:

 If no button is pressed within 

90  seconds, the appliance switches to 

stand-by mode without saving the new 

 settings� In this case, the previously saved 

switch-off time is retained�

Setting the brewing temperature

The brewing temperature can also be set�

1�  Turn the rotary  

knob (13) to position 

2�  Press and hold buttons 

B

 (11) and 

A

 (12) for at least 5 seconds� The set 

brewing temperature is indicated by the 

number of LEDs that now light up�

3�  Now press the start button (10) repeat-

edly until the required number of LEDs 

light up to indicate the temperature: 

LED 

D

 = low 

LED 

D

 and 

E

 = medium 

LED 

D

, 

E

,and 

F

 = high

4�  Press and hold the start button (10) for 

at least 5 seconds� The set number of 

LEDs will light up to indicate that the 

selected temperature has been saved 

successfully�

Note:

 If no button is pressed within 

90  seconds, the appliance switches to 

stand-by mode without saving the new 

 settings� In this case, the previously saved 

brewing temperature setting is retained�