Siemens TE501205RW - Инструкция по эксплуатации - Страница 11

7

en

4�  Assemble the milk frother� Only use 

the appliance when the milk frother (6) 

is completely assembled and fitted. 

5�  Lift the water tank lid (17)�

6�  Remove and rinse the water tank (16) 

and fill it with fresh cold water. Do not fill 

above the 

max

 mark�

7�  Replace the water tank (16) and push it 

firmly downwards into place.

8�  Close the water tank lid (17)� 

9�  Fill the bean container (1) with 

coffee beans (for preparation using 

ground coffee see “Preparation using 

ground coffee”)�

10� Press the power on/off switch 

O / I 

(9) to 

switch on the appliance� LED 

D

 flashes 

and LED 

F

 lights up�

11� Place a container under the milk frother 

outlet (6)� 

12� Carefully pull out the milk frother (6) 

to open it� The appliance rinses out 

the milk frother (6) with water� LED 

F

flashes.

13� When LED 

F

 lights up constantly, 

press in the milk frother (6) to close it� 

The appliance heats up and rinses� Some 

water will run out of the coffee outlet� When 

buttons 

A

 (12), 

B

 (11) and 

C

 (10) light 

up, the appliance is ready for use�

Switching off the appliance 

The factory settings of the fully automatic 

espresso machine are programmed for 

optimal performance� The appliance 

switches off automatically after a specific 

time (the length of time can be adjusted, 

see “Settings – Automatic switch-off”)� 

Exception:

 The appliance switches off 

without rinsing if only hot water or steam 

was dispensed�

To switch the appliance off manually before 

this, press the service button 

A

 (12)� The 

 appliance rinses and switches off�

Note:

 If the appliance is being used for the 

first time, the service programme has been 

run, or the appliance has not been operated 

for a long period, the first beverage will 

not have the full aroma and should not be 

consumed�

When the fully automatic espresso machine 

is first used, you will achieve a suitably thick 

and stable “crema” only after the first few 

cups have been dispensed�

If the appliance is in use for a long period 

of time, water droplets will form on the 

 ventilation slits� This is normal�

Water filter

Using a water filter can prevent a build-up 

of limescale deposits� 

A new water filter must be rinsed before it 

can be used� To do this, proceed as follows:

1� 

Press the water filter firmly into the 

empty water tank with the aid of the 

measuring spoon (18)� 

2�  Fill the water tank (16) with water up to 

the 

max

 mark�