Холодильник Liebherr CBNgb 3956 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
/html/pdf_to_image009.png)
4.7 Switching on the appliance
Note
u
To switch on the entire appliance it is necessary only to
switch on the freezer compartment.
Put the appliance into operation about 2 hours before first
loading food to be frozen.
Do not load food to be frozen before the temperature display
reads -18 °C.
4.7.1 Switching on the freezer compartment
u
Press On/Off button, freezer compartment
Fig. 3 (6).
w
The temperature display of the refrigerator compartment
indicates the current temperature inside.
w
The temperature display of the freezer compartment and the
alarm symbol flash until the temperature is sufficiently low. If
the temperature is above 0 °C, dashes flash. If it is below,
the current temperature flashes.
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Adjusting the brightness
The brightness is adjustable between
h0
(no illumination) and
h5
(maximum luminosity).
u
To activate the setting mode: press the SuperFrost button
Fig. 3 (4) for about 5 s.
w
The display indicates
c
.
w
The menu symbol
Fig. 3 (17) shines.
u
Using the Up setting button, freezer compartment
Fig. 3 (11)
or Down setting button, freezer compartment
Fig. 3 (9),
select
h
.
u
To confirm: briefly press the SuperFrost button
Fig. 3 (4).
u
To make the display brighter: press
Up button, freezer compartment
Fig. 3 (11).
u
To make the display darker: press
Down button, freezer compartment
Fig. 3 (9).
u
To confirm: press SuperFrost button
Fig. 3 (4).
w
The brightness is adjusted to the new value.
u
To deactivate the set-up mode: press On/Off button, freezer
compartment
Fig. 3 (6).
-or-
u
Wait for 5 minutes.
w
The temperature is indicated again in the temperature
display.
5.2 Child proofing
The child-proofing function enables you to make sure that the
appliance is not inadvertently switched off by playing children.
5.2.1 Setting the child lock function
u
To activate the setting mode: press SuperFrost button
Fig. 3 (4) for about 5 s.
w
The display indicates
c
.
w
The menu symbol
Fig. 3 (17) shines.
u
Briefly press the SuperFrost button
Fig. 3 (4).to confirm.
When
c1
is indicated in the display:
u
Tto activate the child lock, briefly
press
the
SuperFrost
button
Fig. 3 (4).
w
The child lock symbol
Fig. 3 (15) shines.
c
flashes in the
display.
When
c0
is indicated in the display:
u
to deactivate the child lock, briefly press the SuperFrost
button
Fig. 3 (4).
w
The child lock symbol
Fig. 3 (15) goes out.
c
flashes in the
display.
u
To deactivate the set-up mode: press On/Off button, freezer
compartment
Fig. 3 (6).
-or-
u
Wait for 5 minutes.
w
The temperature is indicated again in the temperature
display.
5.3 Door alarm
For refrigerator/BioFresh compartment and freezer compart-
ment
If the door is open longer then 60 s, the audible alarm sounds.
The audible alarm is automatically silenced when the door is
closed.
5.3.1 Muting the door alarm
The audible alarm can be muted when the door is open. The
sound switch-off function is active as long as the door is left
open.
u
Press alarm button
Fig. 3 (8).
w
The door alarm is silenced.
5.4 Temperature alarm
The audible alarm sounds if the freezer temperature is not cold
enough.
The temperature display and the alarm symbol
Fig. 3 (2) flash
at the same time.
The cause of the temperature being too high may be:
-
warm fresh food was placed inside
-
too much warm ambient air flowed in when rearranging and
removing food
-
power failure for some time
-
the appliance is faulty
The audible alarm is automatically silenced, the alarm symbol
Fig. 3 (2) goes out and the temperature display stops flashing
when the temperature is sufficiently cold again.
If the alarm status persists: (see Malfunction).
Note
Food may be spoilt if the temperature is not cold enough.
u
Check the quality of the food. Do not consume spoiled food.
5.4.1 Muting the temperature alarm
The audible alarm can be muted. When the temperature is
sufficiently cold again, the alarm function is active again.
u
Press alarm button
Fig. 3 (8).
w
The audible alarm is silenced.
5.5 Refrigerator compartment
The natural circulation of air in the refrigerator compartment
results in zones differing in temperature. It is coldest directly
Control
9
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)