Irinox Fresco D2000110 - Инструкция по эксплуатации - Страница 37

37

Drinks cooling cycle

Before inserting the drinks into the appliance, it is advisable  

to run a pre-cooling cycle

 (see chap. Pre-cooling on p. 23).

Press keys 

 and     repeatedly until the DRINKS 

COOLING cycle is selected.

Press the key   to confirm.

(see chap. Description of cycles on p. 23)

The screen for setting the drinks cooling time, default 

20 min, appears (max 30 min). Press the keys     

to increase or decrease the time by 10 minutes at a 

time (hold down the keys to increase or decrease more 

quickly).

Press key   to return to the previous selection.

Once the desired time is displayed, press the key   to 

confirm and start the cycle.

During the cycle, the time remaining can be changed 

by pressing the keys     and the display shows the 

temperature in the chamber.

Press the key   for 2 seconds to stop the cycle and 

return to the cycle selection.

At the end of the drinks cooling cycle, the display 

flashes and the appliance emits a beep, which is 

repeated after 3 minutes. If FRESCO is not switched off, 

the preservation phase (5°C) begins, which lasts for a 

maximum period of 48h, including the drinks cooling 

cycle. In this phase the appliance beeps at 12h intervals 

until the maximum time is reached.

Press the key   for 2 seconds to stop the cycle and 

return to the cycle selection.