Irinox Fresco D2000110 - Инструкция по эксплуатации - Страница 31

31

During the cycle, the display shows:

 :  the remaining time (which can be changed during 

the cycle by pressing keys     )

 :  the temperature inside the chamber detected by the 

air probe

Press the key   for 2 seconds to stop the cycle and 

return to the cycle selection.

During the delay, if set, the product is preserved at 

5°C (which prevents proofing) and the icon   flashes 

on the display, while the icon    is steady. At the end 

of the delay time, the appliance switches to proofing 

phase. At the end of this cycle, the display flashes and 

the appliance emits a beep, which is repeated after 3 

minutes.

At the end of the proofing cycle, FRESCO switches 

automatically to the preservation phase (10°C) for a 

maximum period of 48h, including the proofing cycle. In 

this phase the appliance beeps at 12h intervals until the 

maximum time is reached.

Press the key   for 2 seconds to stop the cycle and 

return to the cycle selection.