Irinox Fresco D2000110 - Инструкция по эксплуатации - Страница 13

13

Installation

Plate data

The plate stating FRESCO’s specifications is applied to the lower part of the 

appliance and on the back side (Fig.4).

Do not remove, damage or modify the data plate.

Electrical connection

Before starting the electrical appliance, ensure that pre-existing electrical systems 

comply with the law and with the FRESCO plate data (voltage [V], frequency [Hz], 

power [W]).

The electrical appliance is supplied with a 1.2 m long power cable already 

connected to the device and a 16A Schuko plug.

 Ensure that the plug is still accessible after installation! If the plug is not easily 

accessible, the mains must be fitted with omnipolar disconnect devices with a 

contacts opening distance that enables complete disconnection.

 Do not wind the power cable into a coil. Ensure the cable is not a hindrance or 

a hazard to personnel.

Check that the power cable is not crushed or kinked.

 Ensure the power cable does not come into contact with liquid, sharp or hot 

objects or corrosive substances.

 Do not allow children or animals to come into contact with the power cable.

Fig. 4

31010

CORBANESE (TV)

ITALY

Mod.
s/n

Compressor       HERMETIC

V

A

Refrigerant

Charge

Desing pressure (Low)
Desing pressure (High)

Rated Load

Class

Volume

PED Code

IP

KPa
KPa

R404A

Kw

Ph

Hz

s/n

V

A

Kw

Ph

Hz

Model
Serial number

Frequency
Power

Phase

Absorption

Volt

Model

Serial number

Frequency

Power

Phase

Absorption

Volt