Irinox Fresco D2000110 - Инструкция по эксплуатации - Страница 27

27

Freezing -18°C cycle

Before inserting the hot food into the appliance, it is advisable  

to run a pre-cooling cycle 

(see chap. Pre-cooling on p. 23).

Press keys 

 and     repeatedly until the FREEZING 

-18°C cycle is selected.

Press the key   to confirm.

(see chap. Description of cycles on p. 22)

The screen for setting the freezing time, default 2h, 

appears (max 5h).

Press the keys     to increase or decrease the time by 

10 minutes at a time (hold down the keys to increase 

or decrease more quickly). Press key   to return to the 

previous selection.

Once the desired time is displayed, press the key   to 

confirm and start the cycle.

During the cycle, the display shows:

 :  the remaining time (which can be changed during 

the cycle by pressing keys     )

 :  the temperature inside the chamber detected by the 

air probe

Press the key   for 2 seconds to stop the cycle and 

return to the cycle selection.

At the end of the freezing cycle, the display flashes and 

the appliance emits a beep, which is repeated after 

3 minutes. At the end of the freezing cycle, FRESCO 

switches automatically to the preservation phase (-20°C) 

for a maximum period of 48h, including the freezing 

cycle. In this phase the appliance beeps at 12h intervals 

until the maximum time is reached.

Press the key   for 2 seconds to stop the cycle and 

return to the cycle selection.