Irinox Fresco D2000110 - Инструкция по эксплуатации - Страница 23

23

READY MEAL

This cycle heats already cooked food to an ideal temperature for eating 

at a preset time, guaranteeing preservation as in the refrigerator before 

heating begins. The initial preservation phase is at 2°C, while heating is at 

65°C.

After being heated, the food is kept at a constant temperature of 60°C, 

until a new command is given.

DEFROSTING

This cycle defrosts frozen food in a gentle, controlled way, with a set delay 

if required, without losing liquid or beginning any cooking.

CUSTOMISED PRESERVATION

This cycle preserves a product at a temperature between -20°C and 65°C 

for up to 48h.

DRINKS COOLING

This cycle cools bottled or canned drinks in just a few minutes. The 

temperature is reduced by approximately 1°C every minute.

CLEANING

This cycle enables ice build-up on the evaporator to be eliminated and 

the chamber cleaned, using Irinox Clean neutral detergent. It must always 

be carried out with the door open, preferably after every cycle and 

compulsorily when switching from a cold cycle to a hot cycle.

 At the end of the cleaning cycle, the chamber must be perfectly dry.

Pre-cooling

For better results in the cooling and freezing cycles, it is advisable to pre-cool the 

electrical appliance with a short 10-minute cycle.

• With the appliance empty, press keys   and   repeatedly to select the RAPID 

COOLING +3°C or FREEZING -18°C cycle and confirm with   ;

• use keys   and   to set the cooling time to 10 minutes and confirm with   : the 

cycle begins;

• wait for the end of the cycle;

• insert the hot food into the appliance and start the RAPID COOLING +3°C or 

FREEZING -18°C cycle again with the desired parameters.