Einhell TC-PG 25/1/E5 (4152600) - Инструкция по эксплуатации - Страница 17

GB

- 17 -

bustion engine are hot and can cause burns. 

The warnings on the generating set must be 

observed. 

• 

If it is installed in ventilated rooms, the ad-

ditional requirements relating to protection 

against fire and explosions must be observed. 

• 

Before use, the generating set and its elec-

trical equipment (including cables and plug 

connections) need to be checked to ensure 

that they are not faulty. 

• 

The generating set must never be connected 

to any other source of electricity such as 

the electricity supply from a power supply 

company. In special cases where a back-up 

connection to existing electrical systems is 

intended, this may only be carried out by a 

qualified electrician who takes account of the 

differences between the operated equipment 

used by the public power grid and that used 

for the operation of the generating set. It is a 

requirement of this part of ISO 8528 that the 

differences must be specified in the instruc-

tions. 

• 

Given the high mechanical loads, only 

hard-wearing rubber-insulated cables (in 

accordance with IEC 60245-4) or equivalent 

equipment should be used. 

• 

Warning! Observe the regulations on electri-

cal safety applicable to the area in which the 

generating sets are used. 

• 

Warning! Observe the requirements to be met 

and precautions to be taken if restoring power 

to a system using generating sets in depen-

dency on the safety measures for the system 

and the applicable directives and guidelines. 

• 

Generating sets should only be used up to 

their nominal power rating under the rated 

ambient conditions. If the generating set is 

used under conditions which do not meet the 

reference conditions required by ISO 8528-8 

and if this impairs the cooling of the engine or 

the generator, e.g. as a result of operation in 

restricted areas, the output must be reduced. 

Information should be provided to inform the 

user about the reduction in output required as 

a consequence of higher temperatures, ins-

tallation height and air humidity in comparison 

to the reference conditions.

• 

The values quoted in the technical data for 

sound power level (LWA) and sound pressure 

level (LWM) are emission values and not ne-

cessarily reliable workplace values. As there 

is a correlation between emission and immis-

sion levels, the values are not a reliable basis 

for deciding on any additional precautions 

which may be needed. Factors in

fl

 uencing 

the actual user immission level include the 

properties of the work area, other sound sour-

ces etc., the number of machines and other 

processes in the vicinity, as well as the time 

span in which the operator is subjected to the 

noise. Also, the permitted immission level can 

vary from country to country. Nevertheless, 

with this information the user is able to make 

a better assessment of the dangers and risks 

involved.

• 

Never use a faulty or damaged electrical 

equipment (this also applies to extension 

cables and plug connections).

• 

 Electric supply cables and connected equip-

ment  must be in perfect condition.

• 

The generator is to be operated only with 

equipment whose voltage specifications con-

form with the generator‘s output voltage.

• 

Never connect the generator to the power 

supply (socket-outlet).

• 

Keep the cable length to the consumer as 

short as possible.

• 

Dispose of soiled maintenance material and 

operating materials at the appropriate collec-

tion point.

• 

Recycle packaging material, metal and plas-

tics.

2.  Layout and items supplied

2.1 Layout (Fig. 1-3)

 1   Tank indicator

2   Tank cover

3   2 x 230 V~ socket-outlets

4   Earth connection

5   Safety tripping element 230 V

6   Voltmeter

7   Oil 

fi

 ller screw

8   Oil drainage screw

9   Oil shortage cut-out

10   On/O

ff

  switch

11   Choke lever

12   Reversing starter

13   Petrol cock

14   Spark plug wrench

15   Oil 

fi

 ller funnel

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

Anl_TC_PG_25_1_E5_SPK9.indb   17

Anl_TC_PG_25_1_E5_SPK9.indb   17

10.02.2022   10:19:25

10.02.2022   10:19:25