Газонокосилки STIGA Twinclip 955 B 294568038/ST2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
×
×
×
×
×
×
−
−
−
−
−
−
±
±
±
−
−
×
×
×
＊
＊
＊
ENGLISH
Specifications
Air Index
Descriptive Term
Applicable to Emissions Durability Period
Tuneup Specifications
ITEM
SPECIFICATION
MAINTENANCE
GXV160 (PTO shaft type N1)
16
418
365
357 mm
(16.5
14.4
14.1 in)
15.1 kg (33.3 lbs)
4-stroke, overhead valve, single cylinder
163 cm (9.9 cu-in)
[68.0
45.0 mm (2.68
1.77 in)]
An Air Index Information hang tag/label is applied to engines
certified to an emission durability time period in accordance with
the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating to the engine’s emission durability period.
The descriptive term indicates the useful life period for the engine’s
emission control system. See your
Emission Control System
Warranty
for additional information.
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
3.2 kW (4.4 PS, 4.3 bhp) at 3,600 rpm
Moderate
Intermediate
Extended
50 hours [0
80 cm (0
80 cc) inclusive]
125 hours [greater than 80 cm (80 cc)]
125 hours [0
80 cm (0
80 cc) inclusive]
250 hours [greater than 80 cm (80 cc)]
300 hours [0
80 cm (0
80 cc) inclusive]
500 hours [greater than 80 cm (80 cc)]
1,000 hours [225 cm (225 cc) and greater]
Forced air
Transistor magneto
Counterclockwise
1.4
(0.37 US gal , 0.31 Imp gal)
0.65
(0.69 US qt , 0.57 Imp qt)
9.6 N·m (0.98 kgf·m, 7.1 lbf·ft) at
2,500 rpm
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
Spark plug gap
Idle speed
Valve clearance
(cold)
Other
specifications
1,700
150 rpm
IN: 0.15
0.02 mm
EX: 0.20
0.02 mm
0.70
0.80 mm
(0.028
0.031 in)
Refer to page: 10
Refer to shop
manual
See your
authorized
Honda dealer
No other adjustments needed.
Length
Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
07/05/01 15:48:01 32Z4P600_016
