Газонокосилки STIGA Twinclip 955 B 294568038/ST2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
TAKING CARE OF UNEXPECTED PROBLEMS
ENGINE WILL
NOT START
Possible Cause
Correction
TRANSPORTING
ENGINE LACKS
POWER
Possible Cause
Correction
13
If the engine has been running, allow it to cool for at least 15
minutes before loading the engine-powered equipment on the
transport vehicle. A hot engine and exhaust system can burn you
and can ignite some materials.
Keep the engine level when transporting to reduce the possibility
of fuel leakage. Turn the fuel valve to the OFF position (see
page
).
Filter element(s)
restricted.
Bad fuel; engine
stored without
treating or
draining
gasoline, or
refueled with
bad gasoline.
Fuel filter
restricted,
carburetor
malfunction,
ignition
malfunction,
valves stuck, etc.
Check air filter.
Check fuel.
Take engine to
an authorized
Honda
servicing
dealer, or refer
to shop
manual.
Check control
positions.
Check fuel.
Remove and
inspect spark
plug.
Take engine to
an authorized
Honda
servicing
dealer, or refer
to shop
manual.
Fuel valve OFF.
Choke OPEN.
Engine switch
OFF.
Out of fuel.
Bad fuel; engine
stored without
treating or
draining
gasoline, or
refueled with
bad gasoline.
Spark plug faulty,
fouled, or
improperly
gapped.
Spark plug wet
with fuel
(flooded engine).
Fuel filter
restricted,
carburetor
malfunction,
ignition
malfunction,
valves stuck, etc.
Move lever to ON
position.
Move the control
lever to CHOKE
position unless the
engine is warm.
Move the control
lever to MAX.
position.
(Flywheel brake
types: flywheel
brake lever to
RELEASED
position.)
Refuel (p. 8).
Drain fuel tank and
carburetor (p. 11).
Refuel with fresh
gasoline (p. 8).
Gap or replace
spark plug (p. 10).
Dry and reinstall
spark plug. Start
engine with control
lever in MAX.
position.
(Flywheel brake
types: flywheel
brake lever to
RELEASED
position.)
Replace or repair
faulty components
as necessary.
Clean or replace
filter element(s)
(p. 9).
Drain fuel tank and
carburetor (p. 11).
Refuel with fresh
gasoline (p. 8).
Replace or repair
faulty components
as necessary.
1.
2.
3.
4.
1.
2.
3.
6
07/05/01 15:47:04 32Z4P600_013
