Ryobi RLM1956MEB 5133001922 - Инструкция по эксплуатации - Страница 7

English

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

Ŷ

Use fresh fuel.

Ŷ

Store fuel in containers specifically designed for this 
purpose.

Ŷ

Always refuel outdoors where there are no sparks and 
flames. Do not inhale fuel vapour. Do not smoke and 

VWD\DZD\IURPRSHQÀDPHVDQGVSDUNVZKHQ¿OOLQJIXHO

tank or when handling fuel.

Ŷ

Do not let petrol or oil come in contact with your skin.

Ŷ

Keep petrol and oil away from the eyes. If petrol or oil 
comes in contact with the eyes, wash them immediately 
with clean water. If irritation is still present, see a doctor 
immediately.

Ŷ

Clean up spilled petrol immediately.

FILLING THE TANK

6HH¿JXUH

 WARNING

Always shut off engine and allow it to cool for 5 minutes  
before refuelling. Never remove the cap of the fuel tank 
or add petrol to a machine with a running or hot engine. 
Move at least 9 m (30 ft) from refuelling site before 
starting the engine. Do not smoke. Failure to heed this 
warning could result in serious personal injury. 

 WARNING

'RQRWRYHU¿OO)LOOWKHIXHOWDQNWRPPEHORZWKHWRS

of the fuel neck. After fueling, never tilt the mower more 

WKDQGHJUHHVIRUWKLVFRXOGUHVXOWLQIXHOOHDNDJHDQG
ULVNRI¿UHHWF

1.  Clean surface around fuel cap to prevent contamination.

Loosen fuel cap slowly to release pressure and to keep 
fuel from escaping around the cap. Rest the cap on a 
clean surface.

3.  Carefully pour petrol into the tank. Avoid spillage.
4.  Clean and inspect the gasket, then replace all fuel and 

container caps securely. 

5.  Wipe up any fuel spillage. Move 9 m away from 

refuelling site before starting engine.

NOTE:

 It is normal for smoke to be emitted from a new 

HQJLQHGXULQJDQGDIWHU¿UVWXVH

ADDING/CHECKING ENGINE OIL

6HH¿JXUH

(QJLQH RLO KDV D PDMRU LQÀXHQFH RQ HQJLQH SHUIRUPDQFH

and service life. For general, all-temperature use, SAE 
10W-30 is recommended. Always use a 4-cycle motor oil 
that meets or exceeds the requirements for API service 

FODVVL¿FDWLRQ6-

NOTE: 

1RQGHWHUJHQW RU F\FOH HQJLQH RLOV ZLOO GDPDJH

the engine and should not be used.

To add engine oil:

1. 

%HVXUHPRZHULVOHYHODQGDUHDDURXQGRLOFDSGLSVWLFN

is clean.

Remove the cap and seal from oil bottle.

3. 

8QVFUHZWKHRLOFDSGLSVWLFNDQGUHPRYH

4.  Slowly add oil. Fill to the “Full” line on dipstick. Do not 

RYHU¿OO

NOTE: 

When checking the oil level, seat the dipstick in the 

RLO¿OOKROHEXWGRQRWVFUHZLQ

5. 

5HLQVWDOOWKHRLOFDSGLSVWLFNDQGVHFXUH

To check engine oil:

Ŷ

%HVXUHPRZHULVOHYHODQGDUHDDURXQGRLOFDSGLSVWLFN

is clean.

Ŷ

5HPRYH WKH RLO FDSGLSVWLFN :LSH FOHDQ DQG UHVHDW LQ
RLO¿OOKROHEXWGRQRWVFUHZLQ

Ŷ

5HPRYH WKH RLO FDSGLSVWLFN DJDLQ DQG FKHFN RLO OHYHO

Add oil as needed.

STARTING OR STOPPING THE MOWER

6HH¿JXUH

 WARNING

Never start or run the engine inside a closed or poorly 
ventilated area; breathing exhaust fumes can kill.

NOTE

: Reduce the throttle setting during engine shut 

down. If the engine is provided with a shut-off valve, turn 
the fuel off at the conclusion of mowing.

Starting the engine

1.  Press the primer bulb 3 times.

NOTE:

 This step is not usually necessary when starting

an engine that has already run for a few minutes.

Hold the power lever bar down against the handle.

3.  Pull the starter grip until the engine starts. Release the 

starter cord slowly so the rope does not snap back.

NOTE:

 It may be necessary to repeat priming steps in 

cooler weather. In warmer weather, overpriming may 
cause flooding and engine will not start. If you do flood 
the engine, wait a few minutes before attempting to 
start and do not repeat priming steps.

Stopping the engine

Release the power lever and allow the engine to come 
to a complete stop.

MOWING TIPS

Ŷ

Make sure the lawn mower mowing area is clear of 
stones, sticks, wires, and other objects that could 
damage the lawn mower blades or engine. Such 
objects could be accidentally thrown by the mower in 
any direction and cause serious personal injury to the 
operator and others.

Ŷ

For best performance, always cut off one-third or less of 
the total height of the grass.