Газонокосилки AL-KO EASY 5.1 SP-S 113607 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
29
7KHPRWRUKDVD¿[HGVSHHGVHWWLQJ
A speed regulation is not possible.
Without speed remote control, with primer ( 16)
1. Press the primer button 3x, at intervals of approx.
2 seconds (
16
). At temperatures below 10 °C,
press the primer button 5x.
2. Pull the safety bar to the upper bar and hold (
17
) – safety bar does not engage.
3. Pull the starter cord quickly and allow it to slowly
coil up again (
18
).
7KHPRWRUKDVD¿[HGVSHHGVHWWLQJ
A speed regulation is not possible.
Without speed remote control, without primer/choke
1. Pull the safety bar to the upper bar and hold (
17
) – safety bar does not engage.
2. Pull the starter cord quickly and allow it to slowly
coil up again (
18
).
7KHPRWRUKDVD¿[HGVSHHGVHWWLQJ
A speed regulation is not possible.
With speed remote control, with choke
Speed remote
control, with choke
1. Set speed lever to position (
14/1
).
2. Pull the safety bar to the upper bar and hold (
17
) – safety bar does not engage.
3. Pull the starter cord quickly and allow it to slowly
coil up again (
18
).
4. After the motor has warmed up (approx. 15-20
seconds) set the gas lever to a position between
and
(
14/2
).
With speed remote control, without primer/choke
Speed remote
control
Start Stop
1. Set speed lever to position (
20/1
).
2. Pull the safety bar to the upper bar and hold (
17
) - safety bar does not engage.
3. Pull the starter cord quickly and allow it to slowly
coil up again (
18
).
4. After the motor has warmed up (approx. 15-20
seconds) set the speed lever to a position between
and
(
20
).
With speed remote control, with primer ( 16)
Speed remote
control
Start Stop
1. Set speed lever to position (
20/1
).
2. Press the primer button 3x, at intervals of approx.
2 seconds (
16
). At temperatures below 10 °C,
press the primer button 5x.
3. Pull the safety bar to the upper bar and hold (
17
) - safety bar does not engage.
4. Pull the starter cord quickly and allow it to slowly
coil up again (
18
).
5. As soon as the motor is running, set the speed
lever for the desired motor speed to a position
between and
(
20
).
Electric starting (option)
Electric start with primer ( 16)
1. Set gas lever to position "START" (
15/1
).
2. Press the primer button 3x, at intervals of approx.
2 seconds (
16
). At temperatures below 10 °C,
press the primer button 5x.
3. Pull the safety bar to the upper bar and hold (
17
) – safety bar does not engage.
4. Turn ignition key in ignition switch to the right
completely (
19
).
