Газонокосилки AL-KO EASY 5.1 SP-S 113607 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
Translation of the original operating instructions
26
Petrol lawn mower
For longer grass, pull the handle of the central
height adjustment upwards (
1/2
)
The level of the central height adjustment is
displayed (
1/3
)
5. Release the button at the desired cutting height.
Axle adjustment or central adjustment ( 2, 3)
1. To unlock, press the lever to the side and hold.
2. Slide the lever to the left or right in the desired
cutting height.
3. Allow the lever to engage.
4. Make sure all wheels engage at the same position.
Individual wheel quick adjustment or axle adjust-
ment ( 4)
1. To unlock, press the lever to the side and hold.
2. Slide the lever to the left or right in the desired
cutting height.
3. Allow the lever to engage.
4. Make sure all wheels engage at the same position.
Individual wheel adjustment
(
5
)
1. Loosen the wheel bolt in the left or right direction.
2. Insert the wheel bolt in the hole for the desired
cutting height.
3. Tighten the wheel bolt.
The wheel threads have left and right threads.
When screwing in, observe the correct thread
direction in the mower housing and the associ-
ated bolts.
4. Make sure all wheels at the same hole position.
Clean the unit
Used oil may not:
be disposed of in household waste
be dumped into the sewage system, drain or
onto the ground
We recommend disposing of used oil in a closed
container at a recycling centre or a customer service
centre.
Filling with petrol
1. Unscrew the fuel tank cover and store in a clean
location.
2. Fill up with petrol using a funnel.
3.
&ORVHWKHIXHOWDQN¿OOHURSHQLQJ¿UPO\DQGFOHDQ
Filling with motor oil
1.
8QVFUHZWKHRLO¿OOFDSDQGVWRUHLQDFOHDQORFDWLRQ
2. Fill up with oil using a funnel.
3.
&ORVHWKHRLO¿OOHURSHQLQJ¿UPO\DQGFOHDQ
Commissioning
Attention!
The unit may not be used if the cutter area or
mounting parts are loose, damaged or worn!
Perform a visual inspection before each use.
The camera symbol on the following pages refer-
HQFHVWKH¿JXUHVSDJH±
Adjusting the cutting height
Danger - risk of injury!
Adjust the cutting height only while motor is
switched off and the cutting blade has stopped!
ƒ
Always adjust all wheels to the same cutting
height.
ƒ
Cutting height adjustment depends on the
model.
Central adjustment ( 1)
4. Hold the button of the central adjustment pressed (
1/1
).
For shorter grass, press the handle of the cen-
tral height adjustment downwards (
1/2
)
