Факсы Brother MFX-1200 ч.3 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Advanced features
Programming a batch transmission
For this operation to work, two things must be true:
The batch box you re using must exist on your fax machine.
You must know the batch box s identifier number (1 5).
To program a batch transmission into a programmable one-touch key:
1
Press Program key,
A
, 3, 0, 1,
ENTER
. The
LCD
shows the first empty pro-
grammable one-touch number available:
Note: If P2 appears on the
LCD
, it means that you have already entered a
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.49.
2
Press the key that you want to program or change. Here, we ve selected P2.
Note: If your previous command for this key was for a batch transmission
and you want to keep this key programmed for a batch transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the
LCD
, press that key now.
4
Press
ENTER
. The
LCD
asks which operation you want to program into the pro-
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
5
Press until
Communication appears.
6
Press
ENTER
,
ADVANCED FUNCTIONS
five times and then press
ENTER
. The
LCD
shows:
7
Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we ve entered 5:
Note: To change an identifier already entered, press
CANCEL
to erase it.
Then re-enter the correct identifier.
8
Press
ENTER
. The
LCD
asks if you want to make additional settings for this
programmable one-touch number.
If you do not want to make additional settings, press
ENTER
. Skip to step 16.
If you do want to make additional settings, press
and
ENTER
.
9
The
LCD
asks which resolution you want to use for this programmable one-
touch number.
10
Press
until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to
specify the displayed setting for this programmable one-touch key.
11
Press
ENTER
. The
LCD
asks you to select a contrast mode for each programma-
ble one-touch number.
12
Press
until the mode you want appears.
Contrast :-------
←
←
/
→
→
/Enter
Resolution :-----
←
←
/
→
→
/Enter
Option :Off
←
←
/
→
→
/Enter
Batch Tx
Enter Box No. :5
Batch Tx
Enter Box No. :_
Type :Communication
←
←
/
→
→
/Enter
Type :Communication
←
←
/
→
→
/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
3.45
