Kuppersberg HO 658 W - Инструкция по эксплуатации - Страница 6

10

11

Technical passporT

english

english

Technical passporT

electric oven

electric oven



set the timer using sensors < / >. 

The time set is shown on the display 

and the signal function is on.



Press sensor MENU, < / > in order 

to  switch  off  the  signal,

the  signal 

function will go out and the display will 

show the current time.

Caution!

If  the  alarm  signal  is  not  turned 

off manually, it will be turned off 

automatically after approx. 7 minutes.

Semi–automatic operation

If the oven is to be switched off at a 

given time, then you should:



Set  the  oven  function  knob  and 

the  tem perature  regulator  knob  to  the 

setting  at  which  you  want  the  oven  to 

operate.



Press sensor MENU until the 

display will show:



Set  the  required  time  using 

sensors  < / >,  within  a  range  from  1 

minute to 10 hours.

The set time will be introduced to 

the memory after approx. 7 seconds and 

the display will show AUTO function.

When the set time has passed the 

oven is switched off automatically, the 

alarm signal is activated and the signal 

function AUTO fl ashing again;



Set  the  oven  function  knob  and 

the  tem perature  regulator  knob  to  the 

switched–off position.



Press sensor MENU, < / > in order 

to  switch  off  the  signal;  the  signal 

function will go out and the display will 

show the current time.

Caution!

In ovens equipped with one 

control  knob,  the  oven  function  knob 

is  integrated  with  the  temperature 

regulator knob.

automatic operation

If the oven is to be switched on for 

a specifi ed period of time and switched 

off  at  a  fi xed  hour  then you  should  set 

the operation time and the operation 

end time:



Press sensor MENU until the 

display will show:



Set  the  required  time  using  the 

sensors  < / >  within  a  range  from  1 

minute to 10 hours.



Press sensor MENU until the 

display will show:



Set the switch–off time 

(operation end time) using sensors < / >, 

which is limited to a period of 23 hours 
and 59 minutes from the current time.



Set  the  oven  function  knob  and 

the  tem perature  regulator  knob  to  the 
setting  at  which  you  want  the  oven  to 

operate.

The  signal  lights  by

  and    are 

now  on;  the  oven  will  start  operating 

from the point when the difference 
between the set operation end time and 

the operation duration time occurs (e.g. 

the operation time is set to 1 hour, the 
operation end time is set to 14.00, so the 

oven will start working automatically at 
13.00).

The function AUTO is now on; the 

oven will start operating from the point 

when the differ ence between the set 
operation end time and the operation 

duration time occurs (e.g. the operation 

time is set to 1 hour, the operation end 

time is set to 14.00, so the oven will 

start working automatically at 13.00).

When the oven reaches the operation 

end time it will switch off automatically, 
the alarm will be activated and the 

function AUTO will start fl ashing again.



Set  the  oven  function  knob  and 

the  tem perature  regulator  knob  to  the 

switched–off position.



Press sensor MENU, < / > in order 

to switch off the alarm; the function 

AUTO  will  go  out  and  the  display  will 

show the current time.

Cancel settings

Timer and automatic function 

settings may be cancelled at any time.

Cancel automatic function settings:



press sensors <  /  >  simultaneously,

Cancel timer settings:



press sensor MENU to select 

timer settings,



press sensors < / > again,

Change the timer beeps

The tone of the timer beeps may be 

changed as follows:



press sensors <  /  > simultaneously,



select “tone” function with the 

1 sensor, the display panel will start to 

blink: