Kaiser EH 6906 N Chrom - Инструкция по эксплуатации - Страница 5

6 

 EN 

INSTALLATION  INSTRUCTIONS 

ELECTRICAL CONNECTION

 
Before connecting the oven to the mains power 
supply, make sure that: 

•

  The supply voltage corresponds to the 

specifications on the data plate on the front 
of the oven. 

•

  The mains supply has an efficient ground 

connection complying with all applicable 
laws and regulations. 

 
Correct grounding is a legal requirement. If the 
appliance is not pre-fitted with a power cable 
and/or plug, use only suitable cables and plugs 
capable of handling the power specified on the 
appliance's data plate and capable of resisting 
heat. The power cable should never reach a 
temperature 50° C above ambient temperature at 
any point along its length.  
 
 
 
 
If the appliance is to be connected directly to 
mains terminals, fit a switch with minimum 
aperture of 3 mm between the contacts. Make sure 
that the switch is of sufficient capacity for the 
power specified on the appliance's data plate, and 
compliant with applicable regulations. The switch 
must not break the yellow-green earth wire. The 
socket or switch must be easily reachable with the 
oven fully installed. 

Attention! 

 The manufacturer declines all 

responsibility for damage or injury if the 
above instructions and normal safety 
precautions are not respected