Ryobi RBV3000CESV - Инструкция по эксплуатации - Страница 4

2

| English

collector in place.

Ŷ

Keep all cooling air inlets clear of debris.

Ŷ

Use rakes and brooms to loosen debris before blowing/
vacuuming.

Ŷ

Clear the work area before each use. Remove all 
objects such as rocks, broken glass, nails, wire, or 
string which can be blown a considerable distance by 
high velocity air.

 WARNING

Before using the product in vacuum mode you must 
assemble the upper and lower vacuum tubes together 
as shown on page 7. This is a once only operation. 
Never operate the vacuum with only the upper vacuum 

WXEH ¿WWHG 7KH ULVN RI SHUVRQDO LQMXU\ LV VLJQL¿FDQWO\

increased if you fail to follow this warning.

OPERATION

Ŷ

If the cord becomes damaged during use, disconnect 
the cord from the power supply immediately. 

Do not 

touch the cord before disconnecting the power 
supply.

 Do not use the product if the cord is damaged 

or worn.

Ŷ

Operate the product only at reasonable hours – not 
early in the morning or late at night when people might 
be disturbed.

Ŷ

Never operate the product in an explosive atmosphere.

Ŷ

Avoid using the product in bad weather conditions 
especially when there is a risk of lightning.

Ŷ

Do not operate in poor lighting. The operator requires a 
clear view of the work area to identify potential hazards.

Ŷ

Use of hearing protection reduces the ability to hear 
warnings (shouts or alarms). The operator must pay 
extra attention to what is going on in the working area.

Ŷ

Do not get distracted and always concentrate on what 
you are doing. Think about and consider the effect of 
your actions carefully.

Ŷ

Operating similar tools nearby increases both the risk 
of hearing injury and the potential for other persons to 
enter your working area.

Ŷ

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance.

Ŷ

Always be sure of the footing on slopes and walk, never 
run.

Ŷ

Keep all parts of your body away from any moving part. 
Rotating impeller blades can cause severe injury. Stop 
the product and ensure impeller blades have stopped 
rotating before opening the fan cover, installing or 
changing tubes, opening or removing debris bag.

Ŷ

Never run the product without the proper equipment 
attached. When used as a blower, always install the 
blower tubes and close the fan cover. When used as a 
vacuum, always install the vacuum tubes and vacuum 
bag.

Ŷ

Do not modify the product in any way or use parts 
and accessories which are not recommended by the 
manufacturer.

 WARNING

If the product is dropped, suffers heavy impact or begins 
to vibrate abnormally, immediately stop the product and 
inspect for damage or identify the cause of the vibration. 
Any damage should be properly repaired or replaced by 
an authorised service centre.

Ŷ

To reduce the risk of injury associated with contacting 
rotating parts, always stop the product, disconnect from 
the mains, and make sure all moving parts have come 
to a stop:

Ɣ

before cleaning or clearing a blockage

Ɣ

when leaving the product unattended

Ɣ

before installing or removing attachments

Ɣ

before checking, maintenance or working on the 
product

Ɣ

after striking a foreign object to inspect the product 
for damage

Ɣ

if the product starts to vibrate abnormally (inspect 
immediately)

 WARNING

Your blower/vacuum may be supplied with a harness. 
Carefully adjust the harness to comfortably help to 
support the weight of the product.
Identify the quick release mechanism and practice using 
it before you start using the product. Its correct use may 
prevent serious injury in the case of an emergency. Never 
wear additional clothing over the harness or otherwise 
restrict access to the quick release mechanism.

BLOWER SAFETY WARNINGS

Ŷ

Wear a face filter mask in dusty conditions to reduce 
the risk of injury associated with the inhalation of dust.

Ŷ

Do not point the blower nozzle in the direction of people 
or pets.

Ŷ

Never place objects inside the blower tubes.

Ŷ

Do not operate the product near open windows, etc.

Ŷ

Slightly dampen surfaces in dusty conditions.

Ŷ

Use the full blower nozzle extension so the air stream 
can work close to the ground.

Ŷ

Do not place blower on top of or near loose debris. 
Debris may be sucked into intake vent resulting in 
possible damage to the product.

VACUUM SAFETY WARNINGS

 WARNING

Never operate the vacuum with only the upper vacuum 

WXEH ¿WWHG 7KH ULVN RI SHUVRQDO LQMXU\ LV VLJQL¿FDQWO\

increased if you fail to follow this warning.

Ŷ

Do not operate vacuum without vacuum bag assembly 
installed; flying debris could cause serious injury. Make 
sure the vacuum bag is completely zipped closed