Sony DCR-IP210E / DCR-IP220E - Инструкция по эксплуатации - Страница 244

Видеокамеры Sony DCR-IP210E / DCR-IP220E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 296
Загружаем инструкцию
background image

244

If you run into any problem using your camcorder, use the following table to troubleshoot the
problem. If the problem persists, disconnect the power source and contact your Sony dealer. If

“C:

ss

:

ss

” appears on the LCD screen, the self-diagnosis display function has activated. See page

251.

I n  t h e  r e co r d i n g  m o d e

Sympt om

Cause and/ or Correct ive Act ions

• The POWER switch is not set to CAMERA.

c

Set it to CAMERA (p. 38).

• The tape has run out.

c

Rewind the tape or insert a new one (p. 34, 55).

• The write-protect tab is set to expose the red mark.

c

Use a new cassette or slide the tab (p. 35).

• The tape is stuck to the drum (moisture condensation).

c

Remove the cassette and leave your camcorder for at least
one hour to acclimatise (p. 271).

• When your camcorder is in the recording standby mode for

more than five minutes, your camcorder automatically turns
off to save battery power and to prevent battery and tape wear.

c

Set the POWER switch to (CHG) OFF and then to CAMERA.

• The battery pack is dead or nearly dead.

c

Insert a fully charged battery pack (p. 26, 27).

• The viewfinder lens is not adjusted correctly.

c

Adjust the viewfinder lens (p. 41).

• STEADYSHOT is set to OFF in the menu settings.

c

Set it to ON in the menu settings (p. 229).

• The setting is the manual focus mode.

c

Set FOCUS to AUTO (p. 88).

• Shooting conditions are not suitable for autofocus.

c

Adjust to focus manually (p. 88).

• The LCD panel is open.

c

Close the LCD panel when you record using the viewfinder

(p. 13).

• The contrast between the subject and background is too high.

This is not a malfunction.

• This is not a malfunction.

• SLOW SHUTTER, Super NightShot or Colour Slow Shutter

mode is activated. This is not a malfunction.

START/STOP does not operate.

The power goes off.

The image on the viewfinder screen
is not clear.
The SteadyShot function does not
work.
The autofocusing function does not
work.

The picture does not appear in the
viewfinder.

A vertical band appears when you
shoot a subject such as lights or a
candle flame against a dark
background.
A vertical band appears when you
shoot a very bright subject.
Some tiny white, red, blue or green
spots appear on the LCD screen.

— Tr o u b l e sh o o t i n g  —

En g l i sh

Ty p e s o f  t ro u b l e  a n d  h o w  t o  co r re ct  t ro u b l e

Содержание

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Sony DCR-IP210E / DCR-IP220E?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"