Beurer BG 64 - Инструкция по эксплуатации - Страница 24

24

15. What if there are problems?

If the scale detects and error when measuring, the following is displayed.

Display

Cause

Remedy

0_Ld

The maximum load capacity of 150 kg 

was exceeded.

Do not load the unit with over 150 kg.

Lo

The batteries are almost empty.

Replace the batteries (see page 16 and page 

23).

Err

The electrical resistance between the 

electrodes and the sole of your foot is too 

high (e.g. if you have tough calluses).

Repeat the measurement barefoot. If 

necessary,moisten the soles of your feet slightly. 

If necessary, remove the calluses from the soles 

of your feet.

The fat percentage is outside the measu-

rable range (less than 5% or greater than 

50%).

Repeat the measurement barefoot or, if neces-

sary, moisten the soles of your feet slightly.

The water percentage is outside the 

measurable range (less than 36% or gre-

ater than 70%).

Repeat the measurement barefoot or, if neces-

sary, moisten the soles of your feet slightly.

The muscle and bone percentages are 

outside the measurable range (age and 

gender related).

Repeat the measurement barefoot or, if neces-

sary, moisten the soles of your feet slightly.

Full Data

30 measurements have been saved.

Transfer the measurements to your PC.

No display The batteries in the control unit are com-

pletely empty.

Replace the batteries (see page 16).

The batteries in the control unit are not 

inserted correctly.

Check to ensure that the polarity is correct (see 

page 16)

No measurement possible

Possible errors

Remedy

The scale was not activated before you stood on 

it. If you step on the scale before “0.0 KG” is dis-

played, the scale will not work correctly.

Activate the scale correctly (wait for “0.0 KG”) and re-

peat the measurement. Switch on the control unit first 

before the measurement. If necessary, wait 30 se-

conds, then repeat the measurement.

Cordless connection between scale and control 

unit is interrupted.

Briefly remove, then reinsert the batteries of the sca-

le and the control unit; the scale sends an audible si-

gnal when you insert the batteries. Maintain a larger 

distance from the following electromagnetic sources: 

high-voltage pylons, television or wireless computer 

systems, fitness equipment, mobile phones, weather 

stations.

The control unit is too far away from the scale.

Reduce the distance between the scale and control 

unit; maximum distance is 2 metres.

The batteries in the scale are empty.

Replace the batteries (see page 16).