Beurer BF 600 Pure - Инструкция по эксплуатации - Страница 22

22

For environmental reasons, do not dispose of the device in the household waste at the end of its service 

life. Dispose of the device at a suitable local collection or recycling point. 

Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic 

Equipment). If you have any questions, please contact the local authorities responsible for waste 

disposal.

Dispose of packaging in an environmentally friendly manner. 

20

PAP

13. What if there are problems?

If the scale encounters an error during measurement, the following is displayed:

Display

Cause

Solution

Only weight display 
and 

P-01 – P-08 

are 

missing

Unknown measurement as 

it is outside the user assign-

ment limit or a unique assign-

ment is not possible.

Select user on the scale using the “ ” but-

ton or repeat user assignment in the app.

See chapter 10 “Additional information”.

The proportion of fat is out-

side the measurable range 

(less than 4 % or greater than 

65%).

Please repeat the measurement barefoot, or 

with the soles of the feet lightly dampened if 

necessary.
If 

 is still displayed, you are outside of the 

measurable range.

Maximum weight capacity of 

180 kg exceeded.

Loads must be limited to 180 kg.

Incorrect weight is dis-

played.

No flat, stable surface.

Place the scale on a flat, stable surface.

No carpet.

Incorrect weight is dis-

played.

Not standing still.

Stand as still as possible.

Incorrect weight is dis-

played.

Incorrect zero point of scale.

Wait until the scale switches itself off. Activate 

scale. “

C

” may be displayed. Wait for “

0.0

 kg”. 

Then repeat the measurement.

No 

Bluetooth

®

 con-

nection (  symbol is 

missing).

Device outside the range.

The range in the open is approx. 15 m. Walls 

and ceilings reduce the range.

Other radio waves may interfere with the 

transmission. Therefore, do not position the 

scale near devices such as WIFI routers, 

microwaves, induction hobs etc.

No connection to the app.

Completely close the app (including in the 

background).

Switch 

Bluetooth

®

 off and back on again.

Switch the smartphone off and back on again.

Remove the batteries in the scale for a short 

period and reinsert them.

See FAQs at www.beurer.com.

User memory space is full. 

New measurements overwrite 

the older measurements.

Open the app. The data is transferred auto-

matically. This may take up to one minute.

The batteries in the scale are 

empty. 

Replace the batteries in the scale.