Beurer BF 600 Pure - Инструкция по эксплуатации - Страница 21

21

•  On the other hand, if your weight increases in the medium term and your body fat percentage drops or 

stays the same, you may have built up valuable muscle mass.

•  If your weight and body fat percentage both fall at the same time, then your diet is working – you are los-

ing fat mass.

•  Ideally, you should support your diet with physical activity, fitness or strength training. This enables you 

to increase your muscle percentage in the medium term.

•  Body fat, body water and muscle percentages must not be added (muscle tissue also contains compo-

nents made of body water).

10. More information

User assignment

It is possible to assign up to 8 scale users for a weight-only measurement (with shoes) and for a diagnosis 

measurement (bare feet).

For a new measurement, the scale assigns the measurement to the user whose most recently saved 

measurement falls within ± 3kg of this. See chapter 8.

Storing the assigned measurements on the scale and transferring them to the app.

If the app is not open, the newly assigned measurements are saved on the scale. A total of 30 measure-

ments per user can be saved on the scale. The saved measurements are transferred automatically to the 

app if you open the app within the Bluetooth range. 

It is possible to automatically transfer data when the scale is switched off. 

Deleting scale data

If you would like to completely delete all measurements and old user data on the scale, remove the batter-

ies for at least 10 seconds. Then press the unit/reset button and reinsert the batteries at the same time. “

” will appear on the display for several seconds.

This is necessary if you would like to delete scale users who have been set up incorrectly or are no longer 

required, for example.

You must then carry out the actions in chapter 6 again (user assignment).

Changing the batteries

Your scale is equipped with a low battery indicator. If you operate the scale with flat batteries, “

Lo

” will 

appear on the display and the scale will automatically switch off. In this case, the batteries must be 

replaced (2 x 1.5 V AAA). All saved measurements and users remain saved.

Connect the scale to the app again. The system time is updated.

  NOTE:

•  When changing the batteries, use batteries of the same type, make and capacity.

•  Do not use rechargeable batteries.

•  Use batteries free from heavy metals.

11. Cleaning and maintaining the device

The device should be cleaned from time to time.

This should be done using a damp cloth and, if necessary, a small amount of detergent. 

  IMPORTANT

•  Never use abrasive solvents or cleaning products!

•  Never submerge the device in water!

•  Do not clean the device in a dishwasher!

12. Disposal

Empty, completely flat batteries must be disposed of through specially designated collection boxes, recy-

cling points or electronics retailers. You are legally required to dispose of the batteries.

The codes below are printed on batteries containing harmful substances: 

Pb = Battery contains lead

Cd = Battery contains cadmium 

Hg = Battery contains mercury