Vestel VH64E222B - Инструкция по эксплуатации - Страница 35

EN - 14

pessing 

 , “

00

” is displayed and shows 

that timer is active. The dot in the Timer 

Display indicates that 

 and 

 can now 

be used to set the timer value.

The minute minder can be selected when 

all Cooking Zone Indicators are on or off 

(no Cooking Zone Indicator is flashing).

With   and 

, the timer value can be set. 

The minute minder timer begins counting 

down once it has been set.

The minute minder cannot be stopped by 

switching off the appliance or activating the 

key lock function, it will continue to count 

down.

After reaching the “

00

”, the timer, buzzer 

sounds. To stop the buzzer, press any 

button.

Heater timer

Heater timers can be set only for activated 

heaters (heater level must be set between 

1-9).

The first touch of  , activates the 

minute minder. After touching   for a 

second time, the timer is assigned to the 

activated heater. This is indicated by the 

corresponding Cooking Zone Indicator 

flashing.

Touching   again after activating the first 

heater timer, activates the timer for the next 

active heater in a clockwise direction. This 

is indicated by the flashing Cooking Zone 

Indicator.

Pressing   and 

, will allow you to set 

the timer value for the heater.

The timer for the heater that was set first is 

indicated by the illuminated Cooking Zone 

Indicator.

Touching   once again allows further 

timers to be assigned to other activated 

heaters.

10 seconds after the last operation, the 

timer display changes to the timer that 

will run out next. The assignment of the 

timer is displayed by a flashing Cooking 

Zone Indicator. The number of timers that 

are running is indicated by the number of 

cooking zone indicators that are illuminated.

By toggling 

, you can display the timer 

values for the heater timer and the minute 

minder. The assignment is always indicated 

by the flashing Cooking Zone Indicator. 

If no Cooking Zone Indicator flashes, the 

minute minder time is shown in the 2-digit 

Timer Display.

All heater timers can be cleared by 

switching the appliance into S-Mode using 

 . A minute minder will not be cleared, it 

will continue to count down,

To clear a timer in Operation Mode, you 

first have to select the timer by toggling the 

Activate/Deactivate Timer Button until it is 

displayed. The value can be cleared in 2 

different ways:

•  Decrement, by pressing 

 until “

00

” 

appears on the Timer Display.

• 

Press   and 

 simultaneously for 0.5 

seconds until “

00

” is shown in Timer 

Display.

Once a timer reaches “

00

”, the 

corresponding heat level will be set to “

0

”. 

The end of a heater timer or the minute 

minderis indicated by a buzzer This can be 

stopped by pressing any button.

Key Lock

The key lock function is used to set 

‘save mode’ on the appliance during 

operation. It will not be possible to make 

any adjustments by touching the buttons 

(for example heat settings). It will only be 

possible to switch the appliance off.

The lock function is active, if the Key 

Lock button   is pressed for at least 2 

seconds. This operation is acknowledged 

by a buzzer. After successful operation, the 

key lock Indicator flashes and the heater is 

locked.

The heater can only be locked in Operating 

Mode (B-Mode).

If the heater is locked, only the   button 

can be used. All other buttons are blocked. 

If any other button is pressed in the blocked 

mode, the buzzer sounds and the Key Lock 

Indicator flashes. Only the switch off by 

operation by using   is possible. However, 

if you switch off the appliance, you can not 

restart it again without unlocking.

After pressing    for 2 seconds, the Key 

Lock Indicator disappears. Now, the hob 

control is unlocked and can be operated in 

normal order.

Child Lock

Child lock functionality is used to lock the 

appliance in a complicated multi-Step 

process. Child lock (and unlocking) is only 

available in the S-Mode.

First   has to be pressed until the buzzer 

beeps, then 

 and 

 have to be pressed 

simultaneously for at least 0.5 seconds, but 

no longer than 1 sec. Following that, the 

appliance can be locked by touching   . All