Vestel VH64E222B - Инструкция по эксплуатации - Страница 31

EN - 10

• Insert the appliance into the aperture.

2.2 eleCtriCal ConneCtion anD Safety

WARNING:

 The electrical connection 

of this appliance should be carried out 

by an authorised service person or 

qualified electrician, according to the 

instructions in this guide and in compliance 

with the current local regulations.

WARNING: THE APPLIANCE MUST 

BE EARTHED.

• Before connecting the appliance to the

power supply, the voltage rating of the

appliance (stamped on the appliance

identification plate) must be checked for

correspondence to the available mains

supply voltage, and the mains electric

wiring should be capable of handling the

appliance’s power rating (also indicated

on the identification plate).

• During installation, please ensure

that isolated cables are used. An

incorrect connection could damage

your appliance. If the mains cable is

damaged and needs to be replaced this

should be done by a qualified person.

• Do not use adaptors, multiple sockets

and/or extension leads.

• The supply cord should be kept away

from hot parts of the appliance and must

not be bent or compressed. Otherwise

the cord may be damaged, causing a

short circuit.

• If the appliance is not connected

to the mains with a plug, a all-pole

disconnector switch (with at least 3 mm

contact spacing) must be used in order

to meet the safety regulations.

• The fused switch must be easily

accessible once the appliance has been

installed.

• Ensure all connections are adequately

tightened.

• Fix the supply cable in the cable clamp

and then close the cover.

• The terminal box connection is placed

on the terminal box.

4

4

N

N

PE

PE

L2

L3

L1

L

5

5

3

3

2

2

1

1