Vestel VH64E222B - Инструкция по эксплуатации - Страница 29

EN - 8

when needed.

2.  INSTALLATION AND 

PREPARATION FOR USE

WARNING :

 This appliance must be 

installed by an authorised service 

person or qualified technician, 

according to the instructions in this guide 

and in compliance with the current local 

regulations.

•  Incorrect installation may cause harm 

and damage, for which the manufacturer 

accepts no responsibility and the 

warranty will not be valid.

•  Prior to installation, ensure that the local 

distribution conditions (electricity voltage 

and frequency and/or nature of the gas 

and gas pressure) and the adjustments 

of the appliance are compatible. The 

adjustment conditions for this appliance 

are stated on the label.

•  The laws, ordinances, directives and 

standards in force in the country of use 

are to be followed (safety regulations, 

proper recycling in accordance with the 

regulations, etc.).

Instructions for the Installer

General instructions

•  After removing the packaging material 

from the appliance and its accessories, 

ensure that the appliance is not 

damaged. If you suspect any damage, 

do not use it and contact an authorised 

service person or qualified technician 

immediately.

•  Make sure that there are no flammable 

or combustible materials in the close 

vicinity, such as curtains, oil, cloth etc. 

which may catch fire.

•  The worktop and furniture surrounding 

the appliance must be made of 

materials resistant to temperatures 

above 100°C.

•  If a cooker hood or cupboard is to be 

installed above the appliance, the safety 

distance between cooktop and any 

cupboard/cooker hood should be as 

shown below.

HOB

Minimum 

42 cm

Minimum 

42 cm

Minimum  65 cm (with 

hood)

Minimum 70  cm (without 

hood)

•  The appliance should not be installed 

directly above a dishwasher, fridge, 

freezer, washing machine or clothes 

dryer.

•  If the base of the appliance is accessible 

by hand, a barrier made from a suitable 

material must be fitted below the base 

of the appliance, ensuring 

that there is 

no access to the base of the 

appliance

.

2.1 inStallation of the hob

The appliance is supplied with an 

installation kit including adhesive sealing 

material, fixing brackets and screws.

•  Cut the aperture dimensions as 

indicated in the figure. Locate the 

aperture on the worktop so that, after 

the hob is installed, the following 

requirements are followed.

B (mm)

590

min. A (mm)

50

T (mm)

520

min. C (mm)

50

H (mm)

41-47.5

min. E (mm)

500

C1 (mm)

560

min. F (mm)

10

C2 (mm)

490

G (mm)

20

D (mm)

50

I (mm)

25

J (mm)

5