Vestel VH64E222B - Инструкция по эксплуатации - Страница 33

EN - 12

4.  USE OF PRODUCT

4.1 Control of hob

The hob is controlled by the pressing the 

appropriate electronic button. Each button 

press is followed by a buzzer sound.

1

7

8

9 10

11

12 13 14

2

3

4

5

6

1-

 Heater display

2- 

Activate/Deactivate heater

3- 

Timer display

4-

 Timer function cooking zone indicators

5-

 Triple zone indicator

6-

 Dual zone indicator 

7-

 Dual/triple zone selection

8- 

Heat setting/timer decrease

9-

 Activate/Deactive timer 

10- 

Heat setting/timer increase

11-

 Decimal point

12-

 Key lock indicator

13- 

Key lock

14-

 On/Off

Mode Descriptions

Stand-By-

Mode

S-Mode

Mains supply is applied 

to the hob control and all 

heater displays are off or 

a residual heat display is 

active.

Operating-

Mode

B-Mode

At least one heater display 

shows a heat setting 

between ´

0

` and ´

9

`.

Lock Mode

VR-

Mode

The hob control is locked.

Turn on and Turn off the Appliance

If the appliance is in Stand-By mode, it is 

put in Operating mode by pressing the On/

Off button   for at least 1 second. A buzzer 

sound indicates the successful operation .

On all heaters a “

0

” will appear and all 

decimal points of the heaters will flash (1 

sec on, 1 sec off).

If there is no operation within 10 sec, the 

display of all heaters will turn off.

If the displays are turned off, the heater will 

be sent into Stand-By mode.

If   is pressed for more than 2 seconds (in 

Operating mode), the appliance is switched 

off and is sent into S-Mode again. The 

appliance can be turned off by pressing 

 at any time; even if other buttons are 

pressed simultaneously. 

If there is any residual heat from a heater, 

this will be indicated in the corresponding 

Heater Display.

Select Heater

If a single heater is chosen with the 

corresponding Activate/Deactivate Heater 

Button 

 the decimal point of the Heater 

Display flashes. For the selected heater, 

you can set the heat level between 1-9 by 

pressing the Heat Setting Buttons   or 

.

The buttons must be pressed within 3 

seconds, otherwise the heater selection is 

erased and heat setting dot will disappear 

(decimal point). If there is no further 

operation within 10 seconds, the heater 

reverts back to S-Mode.

The heat setting can always be changed by 

pressing   or 

. The available settings 

are between 1-9.

Each button operation or each display 

change is accompanied by a buzzer sound.

Turn on Dual and Triple Zones

Turn on the dual zone

The activation of the dual zone is carried 

out after selecting the desired heater by 

pressing 

. This is confirmed by a buzzer 

sound. At the same time, the corresponding 

Dual Zone Indicator illuminates. Touching 

for a second time, toggles the status of the 

dual zone; it changes from dual zone on to 

dual zone off and back again.

The extension zone can only be activated 

after a level between 1-9 is set on the basic 

zone of the heater.

Turn on triple zone

A dual or triple zone can only be switched 

on if the basic zone of a heater is set to 

a level beyween 1–9 and the heater is 

selected (this is indicated be the dot being 

illuminated).

If   is pressed, the signal sounds and the 

Dual Zone Indicator is illuminated. If 

 is 

pressed once again, there is another buzzer 

and the triple heater is switched on. The 

Triple Zone Indicator will be illuminated and 

the triple zone will be energized.

Pressing 

 again will switch off the triple 

zone of the heater. Each operation causes