Варочная панель Simfer H30I12B011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
23
GB
CONNECTION OF THE DEVICE TO THE MAINS
Please take into consideration the following points before connecting the
device to the mains:
The voltage of the mains must be the same as the voltage written on the
capacity label contained on the device.
The electrical wiring to which the device will be connected must be able
to bear the power value written on the capacity label.
The electrical wiring to which the device will be connected must contain
a ground connection conforming to effective regulations.
The fuse box to which the device will be connected must be located in a
place, where it can be easily reached after the device is placed in position.
If the electrical wiring to which the device will be connected does not
contain a mains connection cable specific to the device, the necessary
wiring must have been prepared by an expert electrician before the device
is placed in position.
The power supply cable must absolutely be in away from heat sources
and must never be exposed to temperatures 50 degrees higher than the
room temperature.
Mains Connection Diagram of the Device
L
3X2,5 mm² 230V~
L1
L2 N1 N2
N P E
The device must be
grounded
