Варочная панель Simfer H30I12B011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
16
GB
•‘‘ON/OFF’’ between approximately 700 msec and 1,150 msec
The reaction time of all other buttons is 250 msec. The value may direct-
ly display a change for the permanent activation of the slider zone (finger
movement).
The reaction time tolerances are ‘‘+/-100’’ milliseconds.
Acoustic Feedback (Audible Warning Signal)
The following activities that take place during the operation of the device
unit will be fed back through an audible warning signal:
•Single short signal sound for ordinary activation of a button. The signal
for the slider zone will only be given during the first activation. No acoustic
signal will be given in the change of values.
•Longer and intermittent signal sound for continuous use of the buttons
within a longer time interval (>10 seconds)
•Expiration of the timer
•Timer function
(Optional)
The timer function is of two types:
•
Independent timer 1.99 minutes:
Timed audible signal (‘‘hour glass’’).
This function can only be activated when none of the cooking surfaces is
in use (all levels = 0). If any cooking surface is started to be used (level >
0) the independent timer will continue to run. If the timer is to be used to
stop a cooking surface (see. cooking surface timer) the control should first
be turned off (power sensor) and then turned on again.
•
Cooking surface timer 1.99 minutes:
This function can only be activated
when only one cooking surface is active (level < 0; indicator point). Timed
audible signal. Four cooking surfaces to be turned off can be programmed
as desired. Cooking Counter 1.99 minutes.
Hour Glass Counter (Independent):
•If the control unit is turned on (all cooking surface indicators will show
‘‘0’’) the independent timer may be activated by touching the selection
button of the timer indicator. The timer indicator will show ‘‘00’’. The
decimal point in the timer indicator will flash. If no other adjustments are
made, the timer will turn off after 10 sec. (black screen). If the timer is
adjusted without activating any cooking surfaces within 10 seconds, the
